User manual AOPEN MK77MV

[. . . ] MK77M-V Socket A AMD Athlon XP / Duron Processor Based DDR Main Board User's Manual WARNING Thermal issue is highly essential for processors with a speed of 600MHz and above. Hence, we recommend you to use the CPU fan qualified by AMD or motherboard manufacturer. Meanwhile, please make sure CPU and fan are securely fastened well. Otherwise, improper fan installation not gets system unstable but also could damage both CPU and motherboard because insufficient thermal dissipation. [. . . ] When the copying files is done, make sure you reboot the system to take the installation effect. Note: When Install LAN driver, please confirm your OS and correctly install driver. If your OS is win 98/NT, please take the following next page for reference. The other OS such as win 2000/XP/ME can be automatical installed - 48 - Install WIN98 LAN drivers The LAN Device Driver can't be set up automatically, you need double click on My Computer -> Control Pnael -> System icon to bring up System Properties screen. Select tab "Device Manager". You will find a yellow "?" mark at PCI Ethernet Controller, that means the driver is not recognize. Double click on the Ethernet Controller. Then PCI Ethernet Controller Properties windows will appear on your screen. Click on the "Reinstall Driver" bar to install driver. The Updade Device Driver Wizard windows will appear on your screen. Click on "Next" bar to continue. - 49 - Please choose "Display a list of the drivers in a specific location, so you can select the driver you want" to the manual install driver, and click on "Next" bar to continue. Select "Network adapters" bar for LAN device and click on "Next" bar to continue. Insert the support CD by the mainboard manufacturer and choose "Have Disk" bar to continue next step. Indicate the driver's location as "D:\lan\WIN98\NETRTS5. INF" (In this location CD disk drive is supposed to be "D" letter. ) - 50 - Select "Realtek RTL8139 [A/B/C/8130] PCI Fast Ethernet NIC" to install, and then click on "OK". Make sure "Realtek RTL8139 [A/B/C/ 8130] PCI Fast Ethernet NIC" driver, and click on "Next". Then the system will do the setup procddure automatically. Completing the upgrade device driver, and click on "Finish" to restart the system to take all the changes effect. After restart, you may check Network adapters under the location mentioned at right figure. The Network adapters shows correctly. - 51 - Install WINNT LAN drivers The LAN Device Driver can't be set up automatically, you need double click on Desktop Network icon to bring up Network Setup Wizard screen. Select tab "Adapters" and "Add" bar to install driver. Insert the support CD by the mainboard manufacturer and choose "Have Disk" bar to continue next step. Key in the driver's location as "D:\lan\WINNT4\" (In this location CD disk drive is supposed to be "D" letter. ) and click on "OK". Select "Realtek RTL8139 [A/B/C/8130] PCI Fast Ethernet Adapter" to install then click on "OK". Chocse the proper Duplex Mode, and click on "OK". - 52 - Make sure "Realtek RTL8139 [A/B/C/8130] PCI Fast Ethernet Adapter" driver, and click on "Close". Setting yourself network. Then the system will do the setup procddure automatically. Completing the upgrade device driver, and click on "Yes" to restart the system to take all the changes effect. After restart, you may check Network adapters under the location mentioned at right figure. The Network adapters shows correctly. - 53 - 4. 6 View the User's Manual Insert the attached CD into your CD-ROM drive, and the CD AutoRun screen should appear. If the AutoRun screen does not appear, double click on Autorun icon in My Computer to bring up Mainboard Software Setup screen. Select the item using your pointing device (e. g. mouse) on the "Manual"bar. Then Online Information windows will appear on the screen. Click on the "Install Acrobe Reader" bar if you need to install acrobe reader. Then click on "MK77M-V Manual" bar to view MK77M-V user's manual. - 54 - 5 BIOS SETUP MK77M-V BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration. This information is stored in batterybacked RAM so that it retains the Setup information even if the system power is turned off. The system BIOS is managing and executing a variety of hardware related functions in the system, including: System date and time Hardware execution sequence Power management functions Allocation of system resources 5. 1 Enter the BIOS To enter the BIOS (Basic Input/ Output System) utility, follow these steps: Step 1. Power on the computer, and the system will perform its POST (Power-On Self Test) routine checks. Press <Del> key immediately, or at the following message: "Press DEL to enter SETUP " or simultaneously press <Ctrl>, <Alt>, <Esc> keys Step 2. Note 1. [. . . ] Spread Spectrum This item allows you to enable/disable the spread spectrum modulation. CPU Host/AGP/PCI Clock This item is used for overclocking only. - 83 - Load Fail-Safe Defaults When you press <Enter> on this item, you will get a confirmation dialog box with a message similar to: Load Fail-Safe Defaults (Y/N) ?N Pressing 'Y' loads the BIOS default values for the most stable, minimal performance system operations. Load Optimized Defaults When you press <Enter> on this item, you will get a confirmation dialog box with a message similar to: Load Optimized Defaults (Y/N) ?N Pressing 'Y' loads the default values that are factory-set for optimal performance system operation. - 84 - Supervisor/ User Password Setting You can set either supervisor or user password, or both of them. [. . . ]