User manual APPLE IMAC G3 2000

[. . . ] Once you've set up your iMac and followed the onscreen guide to connect to the Internet, what's next?In this booklet you'll find more information to help you get the most out of your iMac: 2 4 6 14 18 20 Features Basics Internet and email Desktop video Productivity Learning more and solving problems 26 Installing memory and an AirPort Card 28 Ergonomics and safety 1 What can my iMac do? Microphone Your computer has these built-in features: CD-ROM or DVD-ROM drive Install software, use applications, and listen to music CDs. If your computer has a DVD drive, you can also play DVD videos. Power button Turn your computer on or put it to sleep. ® f Headphone ports Volume controls Two internal stereo speakers CD/DVD eject Eject a CD or DVD from your keyboard. Hot function keys Set the keyboard function keys to automatically open your Web browser, email application, or other favorite application. Apple Pro Mouse An optical mouse you can use on almost any surface 2 Modem Connect to the Internet, browse the World Wide Web, and send email. USB Connect printers, Zip and other disk drives, digital cameras, joysticks, and more. FireWire (on some models) Transfer video from a DV camera. Connect external hard disk drives, printers, and scanners. Ethernet Share files with another computer and access a computer network, printer, or the Internet. Sound input Record sounds using an analog microphone or other audio device. [. . . ] Carefully insert the end of a straightened paper clip into the hole. m Make sure the printer is plugged into the computer and an electrical outlet. Make sure the printer is turned on. Make sure your computer is set up to use your printer. m Install the software that came with your printer. See the documentation that came with the printer for instructions. m Choose the Chooser from the Apple menu and select your printer. You may also need to select the specific printer in the "Connect to" window. Important After ejecting a disc manually, restart the computer. You must restart to enable the drive to eject discs. If you can't eject a CD or DVD: If you have a problem with a USB device: Make sure there isn't a software conflict. Make sure the disc is not in use. m Quit all applications that are using files on the disc. m Then press the Eject key ( ) at the top-right corner of the keyboard. m If that doesn't work, drag the disc's icon to the Trash. m If that doesn't work, restart the computer, then hold down the mouse button. To restart, choose Restart from the Special menu. m Many USB devices work automatically with Apple's USB software. If you installed the software that came with the device, open the Extensions Manager control panel and turn off the software extensions that came with the device. m If that doesn't work, contact the manufacturer of the device to make sure the device and software are compatible with your computer. 24 If you have a problem with a third-party software program: First, make sure the mouse and keyboard are connected. If the Apple Pro Mouse isn't responding properly: m Unplug and then plug in the connectors and make sure they are secure. If that doesn't work, try using the mouse on another surface, like a mouse pad or a notebook. Make sure the software is compatible with your version of system software. m See the documentation that came with the software. You can check the version of system software you have by choosing About This Computer from the Apple menu. If you have a problem with your dialup Internet connection: m Non-reflective, opaque surfaces without repetitive patterns work best. If you run out of room and want to keep the mouse clicked while you lift it: First, make sure the telephone line is properly connected to your computer. m Wait a while, then try connecting again. m Click the mouse, then squeeze the sides with your thumb and fingers and lift the mouse. If the mouse clicks too easily or not easily enough: If that doesn't work, make sure your Internet settings are configured correctly. m Choose Mac Help from the Help menu. There you can find out how to locate and change your Internet settings. m If you're not sure of the correct information for your Internet settings, contact your Internet service provider. m Turn the ring on the bottom of the mouse to adjust the tension of the click. Turn the ring to 1 for greater tension, 2 for medium tension, or 3 for less tension. For the latest troubleshooting information, go to the Apple Support Web site at www. apple. com/support 25 How do I add memory and an AirPort Card? For detailed instructions, refer to Mac Help (see page 20). Before installing: m shut down the computer m unplug all cables, except the power cord m place the computer face down on a soft cloth 2 . Touch the metal shield inside the recessed latch area. Then unplug the power cord. Touch this metal before you touch any parts inside the computer. Don't walk around the room until you've finished installing memory or an AirPort Card. 1 Open the access door using a coin to turn the latch. 3 To install memory, insert a memory module into one of the two lower slots. Be sure to align the notches on the module with the small notches inside the slot. . 26 Close the access door and use a coin to close the latch. . Never turn your computer on unless all of its internal and external parts are in place. 4 5 To install an AirPort Card, detach the antenna from the guide rail, then remove the protective plastic cap. Connect the antenna firmly to the AirPort Card and insert the card sideways into the slot. . For instructions on using the AirPort software, look in the Help Center, available in the Help menu. 6 . [. . . ] Do not allow children access to the interior of this product and do not permit them to handle any cables. Safety Make sure that you m keep these instructions handy for reference by you and others who may use your computer m follow all instructions and warnings regarding your system For your own safety and that of your equipment, always disconnect the power plug (by pulling the plug, not the cord) if any of the following conditions exists: m you want to remove any parts (leave the cord disconnected as long as the computer is open) m the power cord or plug becomes frayed or otherwise damaged m you spill something into the case m your computer is exposed to rain or any other excess moisture m your computer has been dropped or the case has been otherwise damaged m you suspect that your computer needs service or repair m you want to clean the case (use only the recommended procedure discussed in Mac Help) When setting up and using your computer, remember the following: m Place your computer in a location with adequate ventilation. m Your computer has a three-wire grounding plug that will only fit a grounded AC outlet. If you are unable to insert the plug into the outlet, contact a licensed electrician to replace the outlet with a properly grounded outlet. m Make sure you only connect the modem to an analog phone line, the type commonly used in residences. [. . . ]