User manual APPLE IMAC 24 INCH VESA MOUNT ADAPTER

[. . . ] With the VESA Mount Adapter installed, you can use your 24-inch iMac with a variety of VESA-compliant mounting solutions, such as articulating arms or wall mounts. Use the adapter only with a VESA mount that can support the weight of your 24-inch iMac. [. . . ] If it goes in farther, you've missed the latch, so try again. Important: Use only the access card provided with the kit for this step. Use of any other object or instrument could result in personal injury, and damage to your iMac. If your access card has become lost or damaged, go to www. 4 Rotate your iMac forward another 10 degrees until the 8 screws on top of the stand are visible and the stand is locked in place. Important: Keep your iMac upright until the stand is locked in place. 5 Hold the sides of your iMac and carefully lay it down so that the screen is resting on a soft towel or cloth on a flat surface and the stand hangs over the edge of your work surface. 6 Use the TORX tool to remove the 8 screws that attach the stand to the back of your iMac. You'll need these screws to attach the flange to your iMac, so set them aside. 7 Remove the stand and put it in a safe place in case you want to reattach it. 8 Align the hole in the flange with the pin on the back of your iMac, and then use the TORX tool and the 8 screws you removed from the stand to attach the flange. Important: Keep the flange in the locked position while you attach the mount adapter. [. . . ] 5 Tenez l'iMac par les côtés et posez-le doucement à plat de manière que l'écran repose sur une serviette ou un tissu doux sur une surface plane, et que le support soit suspendu au-dessus du bord de votre surface de travail. Other company and product names mentioned herein are trademarks of their respective companies. [. . . ]