User manual APPLE IPHONE BLUETOOTH HEADSET

[. . . ] WARNING: For important safety information about avoiding hearing loss, see page 13. 5 What Else You Can Do To Answer incoming call End current call Decline incoming call Do this Press button. Press button for about one second, until you hear a beep. Press button. Switch to incoming or on-hold call and put current call on hold Switch to incoming or on-hold call and end current call Check whether headset is turned on Turn headset on Turn headset o Press button for about one second, until you hear a beep. [. . . ] 3 On the phone, choose iPhone Bluetooth Headset and enter the PIN code 0000. See the instructions that came with your phone for more information about pairing it with Bluetooth devices. 9 To pair the headset with a Bluetooth enabled Mac using Mac OS X version 10. 4. 9 or later: 1 Open System Preferences and click Bluetooth. 2 Click Devices and click Set Up New Device. When prompted for a passkey, enter 0000. To use the headset with iChat: 1 Pair the headset with your Mac. 2 In iChat, choose iChat > Preferences and click Video. 3 Choose iPhone Bluetooth Headset from the Microphone and Sound Output pop-up menus. To pair the headset with another computer (such as a Windows PC) or Bluetooth device: Follow the instructions that came with the computer or device. When prompted for a passkey or PIN, enter 0000. Use the Dock to Play Music Through External Speakers m Connect speakers with an audio cable that has a standard 3. 5 millimeter stereo miniplug to the Line Out port on the back of the dock. Then connect iPhone and play music to hear it through the speakers. 10 Tips and Troubleshooting m If the headset isn't responding or working correctly, try these steps in order until it starts working. If the status light doesn't blink green, press and hold the button for about three seconds, until you see the status light blink green or hear four rising tones. Make sure the headset and iPhone are charged. During a call, make sure iPhone is set to play sound through the headset. Tap Audio Source and choose iPhone Bluetooth Headset. Make sure iPhone is paired with the headset. On iPhone, make sure Bluetooth is turned on. From the Home screen, choose Settings > General > Bluetooth and turn Bluetooth on. On iPhone, choose Settings and turn Airplane Mode on. Then wait about three seconds and turn it o again. For more tips and troubleshooting, go to: www. apple. com/support/iphone m m m m m m 11 ± Read all safety information below and operating instructions before using the iPhone Bluetooth Headset to avoid injury. Important Safety Information WARNING: Failure to follow these safety instructions could result in fire, electric shock, or other injury or damage. Handling the iPhone Bluetooth Headset Do not drop, disassemble or open, crush, bend or deform, puncture, shred, microwave, incinerate, paint, or insert foreign objects into the iPhone Bluetooth Headset. [. . . ] Other Medical Devices If you use any other personal medical device, consult the manufacturer of your device or your physician to determine if it is adequately shielded from external RF energy. Turn the iPhone Bluetooth Headset o in health care facilities when any regulations posted in these areas instruct you to do so. For more information go to: www. apple. com/environment 17 FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. [. . . ]