User manual APPLE POWER MAC G4 CUBE ABOUT

[. . . ] About the Power Mac G4 Cube Includes setup and expansion information for Power Mac G4 Cube computers K Apple Computer, Inc. © 2000 Apple Computer, Inc. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Apple. The Apple logo is a trademark of Apple Computer, Inc. , registered in the U. S. Use of the "keyboard" Apple logo (Option-Shift-K) for commercial purposes without the prior written consent of Apple may constitute trademark infringement and unfair competition in violation of federal and state laws. [. . . ] This will prevent a destructive voltage overload from damaging the modem. Using an External USB Modem To connect an external USB modem, use a USB cable to connect the modem to a free USB port on the keyboard, computer, USB monitor, or USB hub. Check the documentation that came with the modem to see if it needs to be plugged into a power outlet. Also look for instructions about installing modem software and connecting the modem to a telephone line. 52 Chapter 3 Connecting to an Ethernet Network Your computer comes with built-in 10/100 megabit per second (Mbps) twisted-pair Ethernet networking capability, which you can use to connect to a network. G Ethernet port Connecting to a network gives you access to other computers. You may be able to store and retrieve information, use network printers, modems, and electronic mail, or connect to the Internet. You can also use Ethernet to share files between two computers or set up a small network. If you're connecting to an existing network, you may be able to get information about the network and the software you need to use it from a network administrator who oversees its operation. Identify your organization's network administrator before you begin. Follow these guidelines when selecting a cable for your network: Type of twisted-pair Ethernet Use twisted-pair cable types 10 Mbit 100 Mbit Category 3, 5, or 6 Category 5 or 6 For more information about using your computer on a network or setting up a network, see Mac Help (in the Help menu). Using Your Computer 53 Connecting to a Twisted-Pair Ethernet Network You can connect directly to a 10/100 twisted-pair Ethernet network. You can also connect your computer to an Ethernet network that uses thin coaxial cables. To do this, you need an RJ-45­to­Thin Coax adapter (available from other manufacturers). See your Apple-authorized dealer for more information on Ethernet media adapters. To connect your Macintosh to a centralized 10/100 twisted-pair Ethernet network, follow these steps: 1 2 Plug one end of an RJ-45 twisted-pair cable into the Ethernet port on your Macintosh. Plug the other end of the cord into an RJ-45 wall outlet or external hub that is connected to a twisted-pair Ethernet network. RJ-45 wall plate Ethernet hub or switch Twisted-pair Ethernet cable After you start up the computer, you need to configure the software for your network connection. Your network administrator can provide the necessary information. You can also get help configuring your network software using Mac Help (in the Help menu). For More Information on Using Ethernet Additional information, including setting up an Ethernet network or transferring files using Ethernet, is available in Mac Help. Choose Mac Help from the Help menu and search for "Ethernet" or "network. " For information on networking products you can use with your computer, go to the Macintosh Products Guide at www. apple. com/guide 54 Chapter 3 Using AirPort Wireless Networking AirPort offers an easy and affordable way to provide wireless Internet access anywhere in the home, at work, or in the classroom. Instead of using traditional cables, AirPort uses wireless local area network (LAN) technology to provide wireless communication between multiple computers. Through a wireless network you can set up access to the Internet, transfer files, play multiplayer games, and more. The only thing you need to add is an AirPort Card. You install the AirPort Card in a slot inside the computer and connect it directly to the end of a built-in antenna cable. How AirPort Provides Wireless Internet Access With AirPort, you set up a wireless connection to a device known as a base station, which has a physical connection to the Internet. AirPort technology works like a cordless telephone. The handset of the cordless phone makes a wireless connection to the base, which is connected to the telephone line. [. . . ] m Move the computer farther away from the television or radio. m Plug the computer into an outlet that is on a different circuit from the television or radio. (That is, make certain the computer and the television or radio are on circuits controlled by different circuit breakers or fuses. ) If necessary, consult an Apple-authorized service provider or Apple. See the service and support information that came with your Apple product. [. . . ]