User manual APPLE POWERBOOK G4 GIGABIT ETHERNET MEMORY CARD REPLACEMENT INSTRUCTIONS

[. . . ] Warning: During this procedure, keep small parts away from children. Tools Required The only tool required for this procedure is a jeweler's flat-blade screwdriver (if keyboard is locked). Opening the Computer Warning: Always shut down your computer before opening it to avoid damaging its internal components or causing injury. After you shut down the computer, the internal components can be very hot. [. . . ] Important: To avoid electrostatic discharge damage, always ground yourself by touching the computer's framework before you touch any parts or install any components inside the computer. To avoid static electricity building back up in your body, do not walk around the room until you have completed your installation and closed the computer. Figure 5 Removing the Installed Memory Card 1. To remove a memory card, locate the brackets that secure the card on both sides (Figure 6). Carefully spread the brackets apart until the card releases on each side. Note: If there is a memory card in the upper memory slot (Figure 6A), it must be removed before removing a card in the lower slot (Figure 6B). Figure 6 B A PowerBook G4 (Gigabit Ethernet) Memory Card - 4 Installing the Replacement Memory Card Warning: When handling a memory card, do not touch its gold connectors. To install the memory card, line up the notch in the card with the small tab in the memory slot. Hold the card at a 30-degree angle (Figure 7A), and then push the card into the slot until it is firmly seated. If you are having trouble inserting the card, try pushing one side at a time. Gently push the card down until the two brackets on either side of the card lock into place (Figure 8). Figure 8 PowerBook G4 (Gigabit Ethernet) Memory Card - 5 Closing the Computer 1. Flip the keyboard back toward the keyboard opening in the case. Hold the keyboard at an angle above the keyboard opening, and insert the tabs on the bottom edge of the keyboard into the slots below the edge of the opening. [. . . ] Every effort has been made to ensure that the information in this document is accurate. Apple is not responsible for printing or clerical errors. [. . . ]