User manual APRICORN DRIVEWIRE

[. . . ] DriveWire USB 2. 0 to SATA/IDE CABLE User Guide Attention: New security features and partition types require specific instructions that are not included in this manual. Please review the most current DriveWire FAQ's at: apricorn. com/support. php The Leader in PersonaL sTorage Copyright © Apricorn, Inc. Windows is a registered trademark of Microsoft Corporation. All other trademarks and copyrights referred to are the property of their respective owners. [. . . ] The "Upgrade Mode" screen will appear. Select "Automatic Upgrade" and click Next to continue. 6. If the hard disk drive to receive the cloned data is new or blank, proceed to step 10. If the hard disk drive to receive the cloned data either contains data or is formatted, proceed to step 7. The "Source Hard Disk" screen will appear. Select the appropriate source hard disk. The source hard disk is typically the old hard disk. Click Next to continue. 10 The Leader in Personal Storage . The "Destination Hard Disk" screen will appear. Select the appropriate destination hard disk. The destination hard disk is typically your new hard disk drive. The "Nonempty Destination Hard Disk" screen will appear when you have selected to transfer data to a drive that already contains data. If you need to confirm that you have selected the proper source and destination drives, click the Back button to check. If you have chosen the proper source and destination drives, then select the "Delete partitions on the destination hard disk" button. Click Next to continue. www. apricorn. com 11 10. The "Hard Disk Drives Structure" screen will appear. This screen shows the source hard disk layout before the cloning process and the destination hard disk layout after the cloning process. The next screen outlines the operations that Disk Clone will perform. Click Proceed to continue with cloning your hard disk drive. 1 The Leader in Personal Storage 1. The cloning process will begin after the "Reboot" button is pressed. Do not turn your computer off during this process. However, your computer will reboot itself during the clone process (this is normal) and you should let the process continue until you see the congratulations screen. When the congratulations screen appears, turn off your computer using the power button. [. . . ] Disk Cloning is an exact copy of one drive to another. In doing so, a Clone can boot and run the operating system. The data is exactly the same on both drives. Disk Imaging copies the data on the drive and stores it as a file. [. . . ]