User manual APRILIA SX 50

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual APRILIA SX 50. We hope that this APRILIA SX 50 user guide will be useful to you.

Lastmanuals help download the user guide APRILIA SX 50.


Mode d'emploi APRILIA SX 50
Download

You may also download the following manuals related to this product:

   APRILIA SX 50 2007 (874 ko)
   APRILIA SX 50 ANNEXE 639 (7361 ko)
   APRILIA SX 50 BROCHURE 2009 (1469 ko)

Manual abstract: user guide APRILIA SX 50

Detailed instructions for use are in the User's Guide.

[. . . ] We have compiled this booklet to provide a comprehensive overview of your vehicle's quality features. Please, read it carefully before riding the vehicle for the first time. it contains information , tips and precautions for using your vehicle. It also describes features, details and devices to assure you that you have made the right choice. [. . . ] Never carry in your pockets objects that can be potentially dangerous in case of fall, like: pointed objects such as keys, pens, glass containers, etc. ACCESSORIES User is personally responsible for the installation and use of the accessories. While assembling accessories, make sure that they do not cover the sound or light alarm devices or affect their correct functioning, do not limit the suspension travel or the steering angle, do not obstruct control actuation or reduce the ground clearance and inclination angle at corners. Do not use accessories that hinder access to the controls as they may increase the reaction time in case of an emergency. Fairings and large windshields fitted to the vehicle may cause aerodynamic forces that affect the vehicle stability while riding, mainly at high speeds. Make sure the accessory is firm and secured to the vehicle and that it does not pose any risks while riding the vehicle. Do not add or modify electrical equipment that exceed the vehicle capacity as this may result in a sudden stop or a dangerous lack of power required to keep the sound and light alarm devices operative. To check tension, move the chain at an intermediate point between the crown 41 The chain backslash should be between 30 and 45 mm. TENSION ADJUSTMENT To keep the transmission chain clearance within the right values, loosen nut «A» of the wheel pin, screw the two adjusters «B» making the same number of turns for the right as for the left adjuster, so that the wheel is aligned. LUBRICATION To lubricate the transmission chain, distribute grease in small quantities on the spaces between rollers and links while turning the wheel. Periodically check the inflation pressure of each tyre. Also check that the tyres do not show cuts on the side or irregular tread wear; if this occurs, go to an authorised workshop or at least a workshop equipped for replacement. Use a thickness gauge and check that the distance between electrodes is correct. Replace spark plugs using the recommended brands within the expiration dates indicated in the vehicle maintenance table. Check filter for cleaning and condition every 5000 km and every time the vehicle is used off-road. - Pull up the fairing «C» enough to gain access to the filter - Undo the 4 fixing screws in the air filter housing and remove the air filter cover; - Remove the filtering element; - Wash the sponge in a bowl containing filter oil, wringing it delicately several times; 03_10 - When washing is over, press the filtering element with your hands without squeezing, let it drip and refit. When refitting, be extremely careful to reposition the sponge in the housing support so that the whole sealing lip perimeter is in contact with the sponge. Tighten the 4 fixing screws of the filter cover, remembering that the 2 long screws are the bottom ones. Every 1, 000 km or after a long journey, the coolant level must be checked with a cold engine, the level must be between the minimum «A» and the maximum «B». To replace the coolant, remove the expansion reservoir cap and disconnect the hose from the radiator to the water pump and empty it. After having reinserted the coupling, refill the circuit with coolant, through the expansion tank cap placed on the left side of the scooter. SPECIAL AGIP PERMANENT fluid Coolant Ready for use mixed biodegradable coolant with "long life" technology and characteristics (red). [. . . ] Spark plug adaptor with damaged Take your scooter to an Aprilia thread, loose head retainer, worn Authorised Workshop. Check that the throttle valve is not Take your scooter to an Aprilia dirty or rusted. Spark plug is not dirty or faulty, that the fuel is supplied normally, the washers are leak-tight. Check that the throttle valve is not Take your scooter to an Aprilia dirty or rusted. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE APRILIA SX 50

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual APRILIA SX 50 will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag