User manual ARCAM CD82

[. . . ] Object or liquid entry Take care that objects do not fall and liquids are not spilled into the enclosure through any openings. Liquid filled objects such as vases should not be placed on the equipment. 13. Non-use periods If the unit has a standby function, a small amount of current will continue to flow into the equipment in this mode. Unplug the power cord of the appliance from the outlet if left unused for a long period of time. 4. [. . . ] We recommend high quality cables as inferior quality cables will degrade the sound quality of your system. Please contact your Arcam dealer for details of suitable cables. Audio outputs Connect these to your amplifier's CD or any other line-level input using suitable high quality interconnect cables. Ensure that the left and right audio outputs from the CD player are connected to the same left and right inputs on your amplifier. CD82 only: The second set of sockets can be used to connect to a second amplifier set up for multi-room use. Mains lead The appliance is normally supplied with a moulded mains plug already fitted to the lead. If for any reason the plug needs to be removed, it must be disposed of immediately and securely, as it is a potential shock hazard when inserted into the mains socket. Should you require a new mains lead, contact your Arcam dealer. Coaxial digital output Use this socket if you are using a separate digital to analogue converter (DAC) or digital recorder. Connect to the DAC or recorder's digital input using a suitable 75 screened cable. CAUTION: Never connect the digital output socket to a conventional audio input. Plugging in Push the plug (IEC line socket) of the power cable supplied with the unit into the socket (POWER INLET) in the back of the unit. Put the plug on the other end of the cable into your power supply socket and switch the socket on. Optical digital output Use this socket if you are using a separate DAC or digital recorder with an optical connection. Connect using a suitable optical cable. CD72 rear panel (part) CD72 back panel: CD82 rear panel: CD92 backpanel (part) 230V DIGITAL OUTPUTS AUDIO OUTPUT 230V DIGITAL OUTPUTS AUDIO OUTPUTS L REMOTE IN R REMOTE IN POWER INLET CO-AXIAL OPTICAL R L POWER INLET 1 CO-AXIAL OPTICAL 2 1 23 4 5 1 23 4 5 1 Power inlet, with voltage indicator 2 Coaxial digital output 3 Optical digital output 4 Single audio output 5 Remote input CD72/82 4 1 Power inlet, with voltage indicator 2 Coaxial digital output 3 Optical digital output 4 Twin audio outputs 5 Remote input Using your CD player COMPACT DISC PLAYER CD82 24 BIT DUAL MONO DACS LOAD PLAY STOP PAUSE TRACK POWER 2 345 6 7 1 POWER 1 SKIP TRACK 7 or Press this button to switch the CD player on and off. When first powered up with no CD installed the display shows: To start a CD with a track other than the first, press to locate the desired track. --NO DISC-LOAD 2 To select another track during play, press or . The track is played automatically after selection. Pressing once returns to the start of the current track. To select the previous track, press twice quickly. To go back two tracks, press three times, and so on. To install a CD, press LOAD (or OPEN on the remote control). The CD tray opens ­ it accepts 12cm and 8cm discs. Place the CD in the tray with the label facing uppermost. Press LOAD again (or press PLAY, or gently push the tray in 5mm) to close the tray. You will see the total number of tracks and total disc time, for example. . . TRACK INDEX MIN SEC CDs with text Load You will see the total number of tracks and the total disc time with `CD TEXT' illuminated in the display. The artist and album title scrolls across the display before returning to show the artist and total number of tracks. 8 1 52. 19 12345 678 ANASTACIA Play TRACK INDEX MIN SEC 12345 6 7 8 9 10 11 12 CD TEXT The display returns to `0' after a few seconds. The disc is now ready to play. PLAY 3 Press to play the CD. To restart from track 1, press STOP and then PLAY. [. . . ] EC COUNTRIES -­ These products have been designed to comply with directive 89/336/EEC. USA ­ These products comply with FCC requirements. Laser radiation If an Arcam CD player is operated whilst the outer casing is removed, invisible laser radiation could cause eye damage. CD72/82 7 English Guarantee Worldwide Guarantee This entitles you to have the unit repaired free of charge, during the first two years after purchase, at any authorised Arcam distributor provided that it was originally purchased from an authorised Arcam dealer or distributor. The manufacturer can take no responsibility for defects arising from accident, misuse, abuse, wear and tear, neglect or through unauthorised adjustment and/or repair, neither can they accept responsibility for damage or loss occurring during transit to or from the person claiming under the guarantee. It should be sent carriage prepaid by a reputable carrier -­ NOT by post. [. . . ]