User manual ARCAM DV78

[. . . ] HANDBOOK/MANUEL/HANDBUCH/HANDLEIDING DV 78 Arcam DV78 DVD player Lecture de DVD Arcam DV78 DVD-Spieler Arcam DV78 Arcam DV78 DVD-Speler English Français Deutsch Nederlands DV78 2 Using this handbook This handbook has been designed to give you all the information you need to install, connect, set up and use the Arcam DiVA DV78. The remote control handset supplied with the equipment is also described. It may be that the DV78 has been installed and set up as part of your Hi-Fi installation by a qualified Arcam dealer. In this case, you may wish to skip the sections of this handbook dealing with installation and setting up the unit. [. . . ] Some discs force subtitles on, over-riding player set up. TITLE Press TITLE to access the DVD's `Title' menu. Note that this feature only applies to multi-title discs. P MODE Press P MODE to toggle random playback MENU Press MENU to access the DVD `Disc' menu. This navigation menu is specific to a disc and varies for each title, but typically offers facilities to select chapters, languages, and view extra material such as trailers or documentaries. Once the menu has been accessed, use the cursor pad to move around the menu and press OK to activate a menu `button'. SUBT TITLE MENU ZOOM Press ZOOM to enlarge a particular area of the picture. Each press of the ZOOM button increases the zoom, normally until a maximum of 4x enlargement is reached (although the amount of zoom possible varies depending on the type of disc: in some cases no zooming is possible). Pressing ZOOM when the maximum enlargement has been reached returns the image to normal size. While using the zoom function, the cursor pad can be used to move around within the image. The zoom function can also be used when playback is paused. Note that a zoom level of x1. 25 is particularly useful if the output from the DVD player is in a screen format different from that of your TV. A zoom of x1. 25 when a `widescreeen' image is displayed on a 4:3 TV causes the bars at the top and bottom of the screen to disappear (although the sides of the image are lost); a zoom of x1. 25 when a 4:3 image is displayed on a widescreen TV causes the bars at the side of the image to disappear (although the top and bottom of the image are lost). P MODE ZOOM AUDIO MEM RTN RTN (return) Press RTN to move back through the DVD `Disc' and `Title' menus. Note that this feature is only of use with discs using multi-level menus. ANGLE SETUP STATUS SRCH SRCH (search) It is possible to access any point on the disc directly using the `Search' menu. Press SRCH to access the `Search' menu. ANGLE Some DVDs offer the facility to select different camera angles. If this feature is available the `camera' symbol lights in the display. Press ANGLE to cycle through the available angles. STATUS Press STATUS once to show the elapsed and remaining time of the disc. Press STATUS a second time to give play status information about the current disc. Press STATUS a third time to close the status display. SETUP The status information displayed varies depending on the type of disc ­ DVD, CD or VCD. `Setup' allows you to configure the DV78 for use in your system. Ensure that no disc is playing and press SETUP to access the `Setup' menu. AUDIO Some DVDs offer the facility to select different audio tracks. Press AUDIO to cycle through the available tracks. The TV displays the number, language and type of audio track, e. g. DV78 13 English Using the CR-415 remote control 0­9 keypad OPEN Opens and closes the disc tray This allows direct access to individual tracks on audio CDs. To select a track, press the corresponding keypad button followed by OK. [. . . ] Possible cause Incorrect input selected on audio device (decoder, receiver, amplifier, etc. ) Bad audio connection (analogue or digital) from DV78 to audio device No sound from the centre/rear speakers A two-channel source, such as a CD, is being played The `Audio' is set incorrectly in the `Setup' menu Bad connection between the DV78 and the amplifier/receiver or the amplifier/ receiver and the speakers Solution Select the appropriate input on the audio device (consult that product's handbook) English 21 Check connections at both ends and, if necessary, try an alternative cable There is no fault Enter the `Setup' menu and change the `Audio' setting to `Bitstream/2ch. ' (see page 9) Check connections at both end and, if necessary, try alternative cables Problems with disc playability Problem Player loads disc but does not play, or play-back halts unexpectedly (perhaps with the message `Invalid Region' being displayed) Possible cause Not all discs play automatically when loaded There is a fault in the manufacturing of the disc Solution Press PLAY Some discs are manufactured incorrectly, and are known to cause problems on ARCAM (and other) DVD players. Naturally, we aim to support all discs; from time-to-time we issue software upgrades for the player that fixes new problems of which we are aware. Please contact ARCAM customer support for further details. DVD discs are designed to be played only in the region that they are sold in (for example, discs from the USA are `Region 1' and discs from Europe are `Region 2'). [. . . ]