Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ARCHOS HELMET CAMCORDER GEN4. We hope that this ARCHOS HELMET CAMCORDER GEN4 user guide will be useful to you.
Lastmanuals help download the user guide ARCHOS HELMET CAMCORDER GEN4.
Manual abstract: user guide ARCHOS HELMET CAMCORDER GEN4
Detailed instructions for use are in the User's Guide.
[. . . ] Carefully connect/disconnect the adapter to/from your ARCHOS device. Do not force: you could break the connectors!Your Archos Helmet CamCorder will be powered through your ARCHOS device, so be sure to charge it fully when intending to make longer recordings. [. . . ] Making a Recording Using the CamCorder Application of your ARCHOS Device Your ARCHOS device now powers the camera. on the screen , you see the image the camera is currently seeing. This preview screen thus permits you to adjust the position or direction of the camera before you start your recording. A number of settings such as resolution and bitrate can be adjusted. Normally you need not change these settings. Note: For information on the other settings, please refer to the section on making a video recording in the user manual of your ARCHOS device. please note that the parameter Format does not exist as the setting is pre-determined by the camera. For the same reason, the parameter Source can only be set to `Composite' or `Black & White'. Recording, Note: alternatively, you can press the Start/Stop button on your camera controller to start and stop the recording. In order to find out whether the Helmet CamCorder is idle or recording, press the Status Button. Do not be concerned if the controller's lights are not lit while your Helmet CamCorder is in use. The loudspeaker of your ARCHOS device will be disabled during the recording as this could result in audio feedback. The microphone integrated into the camera controller will record the sound. Therefore make sure that it is not covered in order to obtain the best possible sound for your recording. â· If images look distorted, you might be too close to the object you are filming. This effect is also referred to as "fish eye effect". While the camera is connected to your ARCHOS device, the VideoCorder icon in the Home Screen will by replaced by the CamCorder icon. Please note the following points in order to avoid damage to your Archos Helmet CamCorder: â· Do not attempt to take the camera apart. [. . . ] Specifications are subject to change without notice. All the information contained in this guide was correct at the time of publication. All brands and product names are registered trademarks and the property of their respective owners. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ARCHOS HELMET CAMCORDER GEN4
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ARCHOS HELMET CAMCORDER GEN4 will begin.
