User manual ARIETE 0953

[. . . ] READ THESE INSTRUCTIONS BEFORE USE The necessary precautions must be taken when using electrical appliances, and these include the following: 1. Make sure that the voltage on the appliance rating plate corresponds to that of Never leave the appliance unattended when connected to the power supply; Never place the appliance on or close to sources of heat. Always place the appliance on a flat, level surface during use. Never leave the appliance exposed to the elements (rain, sun, etc. [. . . ] To dispose of product correctly according to European Directive 2012/19/ EU, please refer to and read the provided leaflet enclosed with the product. The microwaves are electromagnetic radiations that are also present in nature in the form of light waves (e. Sunlight) and that, inside the oven, go through food from any directions and warm up the molecules of water, fat, and sugar. The heat is produced very quickly only in food, while the container warms up only indirectly for heat transfer from hot food. This prevents the food from adhering to the container, therefore it is possible to use very little fat or to avoid its use during the cooking process. The microwave cooking is deemed to be very healthy and dietetic since it is low fat. Furthermore, in comparison with the traditional systems, as cooking is at a lower temperature, the food dehydrates less, does not lose its nutrients and preserves its flavour more. HOW TO OPERATE CLOCK SETTING When the microwave oven is plugged in, the display (E) will show "0:00" and a "beep" will be emitted. - Press the button (H) "Clock / Preset" once; the hour indicator will start blinking. - Rotate the dial (M) to increase or the decrease the values of hours (from 0 to 23). - Press the button (H) "Clock / Preset", the minute indicator will start blinking. - Rotate the dial (M) to increase or decrease the values of minutes (from 0 to 59). - Press the button (H) "Clock / Preset" to confirm setting; the sign ":" will flash and the display (E) will show the time set. WARNING: If the clock is not set, it will not work when the appliance is plugged in. The clock setting does not remain stored if the appliance is unplugged. If no operations are carried out for 1 minute during the clock setting process, the appliance will go back to the previous settings automatically. "MICROWAVE" COOKING - Press the button (F) "Microwave", the display (E) will show the power "P100", which will flash. - Press the button (F) "Microwave" several times or rotate the dial (M) for increasing or decreasing The values to select the required power, which will be shown on the display (E) ("P100" corresponds to 100%, "P80" to 80%, "P50" to 50%, "P30" to 30%, or "P10" to 10%). - Rotate the dial (M) to increase or decrease the values of the cooking time (from 0:05 to 95:00 min. / Confirm" again to confirm the cooking time. - The microwave oven will start cooking, the inner light will go on and the display will show the time left. - To stop cooking, open the door or press the "Stop / Clear" button (I): the program set will be paused and the remaining time will stop on the display. [. . . ] / Confirm" to start cooking, the appliance will emit a sound Indicating the start of the first function of defrosting and the countdown will begin. At the end of the first function, the appliance will emit a sound for the start of the second cooking function and a new countdown will begin. - At the end of cooking, the oven will emit five "beeps". Example: If it is required to cook for 7 minutes with a micro- Wave power of 80%: - In delayed start mode is not possible to use "multi-function cooking". [. . . ]