User manual ARIETE BALAI 4163

[. . . ] Non corretto inserimento del serbatoio nella propria sede I fori di uscita vapore potrebbero essere ostruiti dal calcare Aumento improvviso del livello di rumorosità della pompa Fuori uscita di acqua dagli ugelli Mancanza di acqua nel serbatoio Non corretto inserimento del serbatoio nella propria sede Possibili residui di condensa nel condotto vapore With regard to this manual Even if the appliances are made in conformity with the European regulatory specifications in force and therefore all potentially hazardous parts are protected. Carefully read these warnings and use the appliance only for the use it is designed for in order to prevent accidents and damage. Keep this manual close by for future consultation. If you should decide to give this appliance to other people, remember to also include these instructions. [. . . ] € Using the appliance with no water in the tank may damage the pump. Check the water level in the tank on a regular basis. • Do not use sparkling (carbonated) water. If the tap water is particularly hard (higher than 20°f), use a mixture of 50% tap water and 50% demineralised water. € The appliance must only be cleaned with a soft, slightly damped, cloth after unplugging the appliance and allowing all its parts to cool down. Never use solvents which may damage the plastic parts. € Do not pour vinegar, descalers or other scented substances into the tank; otherwise, the warranty may be revoked. € Always unplug the appliance before putting it away. Wait for it to cool down and completely empty the tank. € Do not expose the appliance to atmospheric agents (rain, sun…). € Any modifications made on this product that are not explicitly authorised by the manufacturer may lead to the forfeiture of its safety and guarantee of its use by the user. Danger of damage originating from other causes • Do not use the appliance in closed environments and in the presence of fumes given off by oil-based paints, solvents or waterproofing agents, or by flammable power or other toxic or explosive fumes. € When using on stairs, use extra caution. € Fill up the tank with water before starting up the appliance. Be sure to unplug the appliance before pouring water into the tank. 11 EN • Turn on the appliance only when it is in working position. € Never leave the appliance unattended when it is connected to the power supply. € When you have to leave for even a short period of time, always place the appliance on its accessory for carpet cleaning (O). Turn off the appliance and always unplug the electric power cord. • Store indoors in a cool , dry area. € Save these instructions for future reference. 1) A - Grip B - Steam dispensing button C - Handle D - ON indicator light E - Cord storage hook F - Steam adjusting dial G - Water tank H - Filter I - Motor body L - Steam head M - Floor washable cloth N - Measuring cup O - Attachment for carpet cleaning P - Handle release button Q - Steam discharge nozzle R - Cloth fixing Velcro EN Assembling the appliance Proceed as follows after removing the appliance from the box: Assemble the motor body to the steam head (Fig. [. . . ] Wait at least 5 minutes to allow both the steam head and the cloth to cool down. The cloth can be removed and rinsed during use. Before removing the cloth, press the button (B) to stop steam dispensing and unplug the appliance. Filling the boiler during use No special operation is necessary when the water in the tank runs out. [. . . ]