User manual ARP INSTRUMENTS PRO DGX MODEL 2720 SERVICE MANUAL

[. . . ] That the water inlet and outlet hoses are connected correctly; 3. That the dishwasher is level on the ground. It is worth it: for the longer life span and the correct operation of your dishwasher. 13) Learn to get to know the parts which make up your dishwasher, you will use it better for it. [. . . ] You can choose from six different positions. Warning Three-in-one dishwasher tablets are now available on the market, and combine the detergent, salt and rinse aid all in one. If the water in your area is hard or very hard, we still recommend you pour extra salt into the relevant dispenser to prevent the formation of white streaks on your dishes or on the appliance interior. Add rinse aid to the corresponding container only if you are dissatisfied with the results on your dishes. In any case, please read the manufacturer's instructions provided on the packet. 16 ARISTON DISHWASHER - Instructions for installation and use A wash cycle for every degree of soil Select the right wash cycle D ISHWASHER Salt, rinse aid, the right amount of detergent and the this is the formula to get the best results and to keep shape Note: in the auto wash cycles, the cycles some modifications due to the intervention which evaluates how dirty the dishes are the cycle in accordance. "AUTO" wash cycles This means that your dishwasher is equipped with correct wash cycle: a sensor which evaluate how your dishwasher in dirty your dishes are and allows these wash cycles to adjust automatically, to could undergo provide you with a more of the sensor efficient and economic wash and optimises cycle. &\FOH &\FOH VH OH FWLRQ LQVWUXFWLRQV &\FOH GH VFULSWLRQ ' HWH UJH QW IRU SUH ZDVK  ZDVK 5 LQVH $LG :DVK F\FOH GXUDWLRQ “ PDUJLQ ZLWKRXW H [WUD GU\LQJ $XWR , QWH QVLYH Very dirty dishes, pots and pans (not to be used with delicate items). Pre-wash with hot water at 40°C Extended wash at 65°C. 2 Rinses with cold water Rinse with hot water at 65°C. Cold Rinse Rinse with hot water at 70°C. Supply and drain hoses, which can In this case, the wash cycle time be directed towards the left or right will be about 15 minutes shorter to facilitate appropriate and the wash will be slightly less installation. The connection must be made to Levelling. Hot water supply following the Once the appliance is positioned, same procedures as those indicated adjust the feet by screwing them in for the cold water connection. Or out depending on how high you want it and to level it so that it is Anti-flooding protection horizontal. Make sure that it is not Your dishwasher is provided with a inclined more than 2 degrees. If the special system which blocks the appliance is level, it will help ensure water supply in the event of leaks its correct operation. And then adjust the height using the withstand extremely high pres- First of all, check that the mains screws located on the front bottom sures. Should the inner hose break, voltage and frequency values part of the machine. Use a the outer hose will consequently correspond to those stated on the screwdriver to turn the screws in turn red. Safety in the event of rating plate located on the stainless the clockwise or anti-clockwise flooding is ensured by the second steel inner door of the appliance direction to increase or decrease clear hose that contains the former. And that the electrical system to the height respectively. [. . . ] Check the sprayer arms regularly and clean them once in a while (letters F and I “How is it made?Keep your dishwasher in shape Respecting these few rules ensures you will always have a reliable work companion by your side. When the wash cycle has ended, always remember to turn off the water supply tap and to leave the appliance door ajar. This way, moisture and bad odours will not be trapped inside. [. . . ]