User manual ARRI WIRELESS REMOTE SYSTEM SYSTEM GUIDE

[. . . ] W R S _ WIRELESS REMOTE SYSTEM SYSTEM GUIDE 04/2006 02 04/2006 W R S _ System Guide 03 DEAR FRIENDS Working on a film set is a hectic business, and the equipment must meet high standards so you can perform your job as efficiently as possible. In designing this new generation of components for the Wireless Remote System we have carefully looked at the needs of the assistants and talked to many of you about existing lens and camera remote systems. In addition we have talked to many rental houses about their needs. As a result these new components are substantially smaller and lighter than before, while at the same time having longer battery life and a more robust radio transmission. [. . . ] The screen of the LDD-FP is a high contrast Advanced TFT color screen with adjustable brightness. Compatibility: It is possible to use the LDD-FP together with the Cinematography Electronics Cine Tape Measure. The CTM calculates the distance between the filmgate and the focus target. This distance is marked with a litle arrow in the focus scale of the LDD-FP, as long as you hold a button on LDD-FP or WMA-3. The Lens Data Display for Focus Puller (LDD-FP) can be operated wirelessly with the Wireless Main Unit 3 (WMU-3). To use the LDD-FP on the WMU-3, compatible software is required for the LDD-FP, Studio Lens Data Box LDB-2, Lite Lens Data Box LDB-2. The LDD-FP is not compatible with WMU-1, WMU-2, WHA-1, WHA-2 or WHA-3. It is not possible to operate the WRC-1 and the Lens Data Display for Focus Puller (LDD-FP) on the same Wireless Main Unit. For wireless operation of WRC-1 and LDD-FP at the same time, two Wireless Main Units must be used. The same is true for two WRC-1 and LDD-FP units. K2. 54163. 0 Lens Data Display for the Focus Puller Lens Data Display for Focus Puller (LDD-FP) 16 W R S _ System Guide 04/2006 WRS COMPONENTS Wireless Extension Unit 1 (WEU-1) With this unit it is possible to connect the hand controllers to a Wireless Main Unit with a cable. It consists of the Wireless Main Attachment WMA-1, which mounts on the WMU, and the Wired Handgrip Attachment WHA-1, which accepts the hand controllers. The Wired Handgrip Attachment 1 can be used separately to connect the WRC-1 with cable WC-W1 to all models of ARRIFLEX 416 Plus, 235, 435, 535 or 16 SR 3. Compatibility: When the WHA-1 is used to connect the WRC-1 to the CCU port of a 435 Xtreme, fast ramps and the minimum speed of 0. 1fps are not accessible. The WHA-2 must be connected to the LCS port to access these features. Wireless Extension Unit 1 (WEU-1) K2. 52056. 0 Wireless Extension Unit 1 Wired Handgrip Attachment 1 (WHA-1) This handgrip attachment can be used to connect the Wireless Remote Control (WRC1) with cable WC-W1 to all models of ARRIFLEX 416 Plus, 235, 435, 535 or 16 SR 3. Compatibility: When the WHA-1 is used to connect the WRC-1 to the CCU port of a 435 Xtreme, fast ramps and the minimum speed of 0. 1fps are not accessible. The WHA-2 must be connected to the LCS port to access these features. K2. 52070. 0 Wired Handgrip Attachment 1 Wired Handgrip Attachment 1 (WHA-1) Wired Handgrip Attachment 2 (WHA-2) With this handgrip attachment the hand controllers WFU-1, WFU-3 and/or WZU-1, WZU-3 or the Wireless Remote Control (WRC-1) can be operated hardwired. Compatibility: The WHA-2 works with the ARRICAM Studio, the ARRICAM Lite, the ARRIFLEX 416 Plus and 435 Xtreme. It can be connected to the LCS socket of an ARRICAM Lens Data Box, 416 Plus, 435 Xtreme or to a UMC-3 with cable LC-M1, LC-M2, LC-Z1 or LC-Z2. Alternatively it can be connected to the CAC connector of Studio or Lite using cable KC-70 (3m/9ft). For lens control on an ARRICAM, a Lens Data Box must be present. [. . . ] # K2. 52048. 0 K2. 54014. 0 K2. 54025. 0 K2. 52237. 0 K2. 52262. 0 K2. 54194. 0 K2. 54195. 0 K2. 52040. 0 435 Advanced, URM-1, 435 Xtreme, URM-2, URM-3, WHA-1, WHA-2, WHA-3 K2. 52226. 0 WMU-2, WMU-3 K2. 65000. 0 Camera Radios & Motor Controllers Accessories Unit Description Studio LDB Adapter Quick Change Adapter 3/8" Compatible with. . . . ARRICAM Studio, Studio LDB, Studio LDB-2 UMC-1, all models of ARRIFLEX 416, 235, 435, 535, 16 SR 3 Ident. # K2. 54144. 0 K2. 52080. 0 Camera Radios & Motor Controllers Accessories Unit CLM-1 CLM-2 Description Controlled Lens Motor 1 Controlled Lens Motor 2 Compatible with. . . . UMC-3, UMC-1, Studio LDB, Studio LDB-2, Lite LDB, Lite LDB-2, FEM-2 UMC-3, UMC-1, Studio LDB, Studio LDB-2, Lite LDB, Lite LDB-2, FEM-2 Ident. [. . . ]