User manual ART 416

[. . . ] Input Level: XLR -10dBV MIC level/+20dB LINE level, SOURCE RCAs 24dBV Phantom Power: 12VDC Output Level: +17dBV Output Impedance: 51 ohms Max. Gain: 55dB MIC, 26dB SOURCE EQ: +/- 12dB @ 100 & 10KHz DNR: 82dB Power Requirements: 120VAC / 50-60Hz, or 240VAC / 50Hz, 15VA Dimensions: 19 inch x 1. 75 inch x 6 inch (480mm x 44. 5mm x 152mm) Weight: 6. 1 lb. (2. 8kg) Features · · · · · · · · Three XLR MIC/line inputs each with its own LEVEL control and CLIP LED Three MIC/LINE input level selector buttons, one for each XLR input Three PHANTOM POWER DIP switch selectors, one for each XLR input Three sets of L and R RCA SOURCE INPUTS each with its own LEVEL control BASS and TREBLE master controls LEVEL MASTER ¼" inch EFFECTS SEND and L and R RETURN jacks EFX LOOP LEVEL control and IN/OUT push button Usage a) Verify proper voltage selection on the IEC style power connector for your location. [. . . ] i) Switch on the power and set the MASTER LEVEL to the ½ way setting, then adjust the channel LEVEL controls as required for the best mix and level while checking the MICROPHONE channel CLIP LEDs for activity. Turn down any channel with CLIP activity until it stops. j) Adjust BASS and TREBLE controls for the desired balance. k) Re-adjust the MASTER LEVEL as required for best signal level. WARRANTY INFORMATION Limited Warranty Applied Research and Technology will provide warranty and service for this unit in accordance with the following warrants: Applied Research and Technology, (A R T) warrants to the original purchaser that this product and the components thereof will be free from defects in workmanship and materials for a period of one year from the date of purchase. Applied Research and Technology will, without charge, repair or replace, at its option, defective product or component parts upon prepaid delivery to the factory service department or authorized service center, accompanied by proof of purchase date in the form of a valid sales receipt. Exclusions: This warranty does not apply in the event of misuse or abuse of the product or as a result of unauthorized alterations or repairs. This warranty is void if the serial number is altered, defaced, or removed. A R T reserves the right to make changes in design or make additions to or improvements upon this product without any obligation to install the same on products previously manufactured. A R T shall not be liable for any consequential damages, including without limitation damages resulting from loss of use. Some states do not allow limitations of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific rights and you may have other rights, which vary, from state to state. For units purchased outside the United States, an authorized distributor of Applied Research and Technology will provide service. Service: The following information is provided in the unlikely event that your unit requires service. 1) Be sure that the unit is the cause of the problem. Check to make sure that all cables are connected correctly, and the cables themselves are in working condition. [. . . ] Print your return shipping address on the outside of the box. 5) Include with your unit: a return shipping address (we cannot ship to a P. O. Box), a copy of your purchase receipt, a daytime phone number, and a description of the problem. [. . . ]