User manual ART 4X4 PRO DATASHEET

[. . . ] Professional Power Distribution Systems with Advanced Power FilteringTM 4x4 PRO SERIES Presenting the 4x4 PRO SERIES Power Distribution Systems from ART. [. . . ] By using both Common Mode and Differential Mode topologies in series for the filter design we are able to block virtually all of the unwanted noise that is between the AC line and ground, and also the two sides of the AC line. This has the additional benefit of reducing ground loop problems in your system. High frequency noise currents in particular are highly attenuated in both directions so that any line noise that could be generated by one of your components is not allowed to get back into your main A. C. wiring so if you use a number of PRO SERIES Power Conditioners in your setup, you can distribute and isolate the noisy components from the sensitive components in your system. Additionally, any signals above 10kHz are filtered from the line with over 40dB of attenuation above 100kHz and beyond. Every PRO SERIES power conditioner is designed with a power capacity of 1800 Watts, surge/spike protection, APF with EMI & RFI filtering, front-mounted unswitched power outlet and an adjustable rear-mounted gooseneck light source for bright illumination behind the rack. The spacing and alignment of the rear outlets to accommodate various size power plugs and AC adapters. The SP4x4 and PS4x4 are equipped with pull-out light pipe lamps with an "auto-off" microswitch built-in for a quicker shut down. [. . . ] ©2006 Applied Research and Technology ART-4x4PRO-Specs-0106 [. . . ]