User manual ART ART418

[. . . ] Each line input can be converted internally to a line output for that channel. Two 418's can be patched together via their Pre-Fade Out and Aux in jacks so that one is slaved to the other for up to 16 channels with one master level. Specifications · · · · · · · · · · · · Input Impedance: 600 ohms Mic, 18K ohms Line, 10k ohms Aux. [. . . ] g) To inter-connect two 418s for 16 channels, run a shielded, unbalanced patch cable from the PRE-FADE OUT jack on mixer A to the AUX BUS IN jack on mixer B. Note that only the MASTER LEVEL on mixer B will now function. h) To convert the line input on a channel to a line output, unplug the 418's AC cord from the wall and remove the top plate. Move the jumper for the desired channel to pins 2 & 3. Now that channel's line input is converted to a line output and may be connected to the input of another mixer. Do not connect the output of a mixer or any other signal source here now or the unit may sustain damage. Be sure to replace the lid before plugging the unit back into the AC socket. WARRANTY INFORMATION Limited Warranty Applied Research and Technology will provide warranty and service for this unit in accordance with the following warrants: Applied Research and Technology, (A R T) warrants to the original purchaser that this product and the components thereof will be free from defects in workmanship and materials for a period of one year from the date of purchase. Applied Research and Technology will, without charge, repair or replace, at its option, defective product or component parts upon prepaid delivery to the factory service department or authorized service center, accompanied by proof of purchase date in the form of a valid sales receipt. Exclusions: This warranty does not apply in the event of misuse or abuse of the product or as a result of unauthorized alterations or repairs. This warranty is void if the serial number is altered, defaced, or removed. A R T reserves the right to make changes in design or make additions to or improvements upon this product without any obligation to install the same on products previously manufactured. A R T shall not be liable for any consequential damages, including without limitation damages resulting from loss of use. Some states do not allow limitations of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific rights and you may have other rights, which vary, from state to state. For units purchased outside the United States, an authorized distributor of Applied Research and Technology will provide service. Service: The following information is provided in the unlikely event that your unit requires service. 1) Be sure that the unit is the cause of the problem. [. . . ] 5) Include with your unit: a return shipping address (we cannot ship to a P. O. Box), a copy of your purchase receipt, a daytime phone number, and a description of the problem. 6) Ship only your unit (keep your manual!) to: APPLIED RESEARCH AND TECHNOLOGY 215 TREMONT STREET ROCHESTER, NEW YORK 14608 ATTN: REPAIR DEPARTMENT RA# ____________________ 7) Contact our Customer Service department at (585) 436-2720 for your Return Authorization number or questions regarding technical assistance or repairs. [. . . ]