User manual ARTHUR MARTIN AFT602W

[. . . ] In the ARTHUR MARTIN product range, you will also find a wide choice of ovens, microwaves, cooking hobs, cookers, dishwashers, washing machines, driers, fridges and freezers, that you can coordinate with your new ARTHUR MARTIN hood Visit our website where you will find all of our products, as well as useful and complementary information. As part of our commitment to constantly improving our products, we reserve the right to make changes to them based on technical advances to their technical and functional features and appearance. Warning: Before installing and using your appliance, please carefully read this Guide to Installation and Use, which will allow you to quickly familiarise yourself with its operation. - Never use steam or high-pressure devices to clean your appliance (requirement imposed by electrical safety). [. . . ] - We thank you doing your part to protect the environment. Warning Installation should only be performed by installers and qualified technicians Warning Remove the protective film from the grease filter before use. - The appliance must be unplugged during installation or when any repairs or maintenance work is being performed. - Ensure that the network voltage corresponds to the voltage noted on the identification plate located inside the hood. - If the electrical installation at your residence requires any changes in order to hook up your Appliance, call upon a professional electrician. - If the hood is being used in evacuation mode, do not connect the appliance to a combustion gas exhaust duct (boiler, chimney, etc. ) or to a CMV (controlled mechanical ventilation) system. - Under no circumstances should the exhaust duct empty into the attic. - Install the hood at safe distance of at least 65 cm from an cooking hob. This appliance can be installed in either duction version or filtering version. 1) Your hood can be connected to this outlet using a flue (Ø 150mm that is enamelled, in aluminium, flexible or made of inflammable material). Drill the 4 holes and fit the screw anchors provided. Apply the supplied brackets to the wall using the relative screws and screw anchors (Fig. Before installing the hood, check that the bracket fixing screws A have been sufficiently slackened to allow the hood itself to be fitted in place. Now fit on the hood using the relative rectangular slots situated at the rear of the appliance. Since these coupling slots are dimensionally larger than the brackets, the horizontal position of the appliance can be adjusted by sliding to the right or left in order to align the equipment. The appliance can be regulated in height by means of the relative bracket adjuster screws B. Once having regulated the equipment, fix everything in place by tightening screws A and inserting screws C. Ducting mode - Using the supplied screws and screw anchors, fix the upper flue bearing bracket to the ceiling and/ or wall, checking that it is aligned with the hood (Fig. - Connect the air outlet pipe to the air vent of the hood; use a flexible pipe and lock it to the air vent of the hood with a metal hose clamp - Fig. - For ducting hoods, turn the upper flue over so that the air exhaust grid is in the lower section (Fig. Screws must be worked from the inside of appliance (Fig. [. . . ] This guide to installation and use is valid for several models. Minor differences in details and fittings may emerge between your appliance and the descriptions provided. Always unplug the hood before cleaning it or performing other maintenance acts. Regular maintenance of your appliance is a guarantee of proper functioning, good performance and durability. [. . . ]