User manual ARTHUR MARTIN ASF66811X

[. . . ] user manual Dishwasher ASF66811 2 electrolux Electrolux. Thinking of you. Share more of our thinking at www. electrolux. com Contents Safety information Product description Control panel First use Set the water softener Use of dishwasher salt Use of rinse aid Daily use Load cutlery and dishes Use of detergent Multi-tab function Select and start a washing programme 2 4 5 6 7 8 8 9 10 14 15 15 Subject to change without notice Unloading the dishwasher Washing programmes Care and cleaning What to do if. . . Technical data Hints for test institutes Installation Water connection Electrical connection Environment concerns 16 17 18 19 20 20 21 22 23 24 Safety information In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features. [. . . ] If you want to cancel the "Multitab function " you have to cancel the programme setting and then deactivate the ''Multitab function''. In this case you have to set a washing programme (and desired options) again. Activation/deactivation of the Multitab function Simultaneously press and hold the two Multitab buttons (function buttons D and E) until the Multitab indicator light comes on. To deactivate the function press the same buttons again until the indicator light corresponding to the Multitab function symbol goes off. If the drying results are not satisfactory we suggest that you: 1. Fill up the rinse aid dispenser with rinse aid. · The activation/deactivation of the rinse aid is only possible with the Multitab function active. Activation/deactivation of the rinse aid dispenser 1. Simultaneously press and hold function buttons B and C, until the lights of function buttons A , B, and C start flashing. Press function button B, the lights of function buttons A and C turn off while the light of function button B continues to flash. The digital display indicates the current setting. Rinse aid dispenser deactivated Rinse aid dispenser activated 4. To change the setting, press button B again, the digital display shows the new setting. To memorize the operation, switch off the dishwasher by pressing the On/Off button. If you decide to revert back to the use of individual detergents we advise that you: 1. Fill up the salt container and the rinse aid dispenser again. Adjust the water hardness setting to the highest setting and perform 1 normal washing programme without loading any dishes. Adjust the water hardness setting according to the hardness of the water in your area. Adjust the rinse aid dosage. Select and start a washing programme Select the washing programme and delay start with the door slightly opened. The start of the programme or the countdown of the delay start will occur only after the closure of 16 electrolux the door. Until then it is possible to modify the settings 1. Check that the baskets have been loaded correctly and that the spray arms are free to rotate. Programme-progress-display is fully on with a blue light. [. . . ] If you use a drain hose extension, its internal diameter must be no smaller than the diameter of the hose provided. Likewise the internal diameter of the couplings used for connections to the waste outlet must be no smaller than the diameter of the hose provided. When connecting the drain hose to an under sink trap spigot, the entire plastic membrane (A) must be removed. Failure to remove all the membrane will result in food particles building up over time eventually blocking the dishwasher drain hose spigot max 400 cm min 40 cm Our appliances are supplied with a security device to protect against the return of dirty water back into the machine. [. . . ]