User manual ARTHUR MARTIN ASI67050X

[. . . ] user manual Dishwasher ASI 67050 2 electrolux Electrolux. Thinking of you. Share more of our thinking at www. electrolux. com Contents Safety information Product description Control panel First use Setting the water softener Use of dishwasher salt Use of rinse aid Daily use Loading cutlery and dishes Use of detergent Multitab function Select and start a washing programme 2 4 5 7 7 8 9 9 10 14 15 16 Subject to change without notice Unloading the dishwasher Washing programmes Care and cleaning What to do if. . . Technical data Hints for test institutes Installation Water connection Electrical connection Environment concerns 17 18 19 20 21 21 22 23 24 25 Safety information In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features. [. . . ] The programme indicator lights above function buttons A, B and C start flashing 3. Press function button B, the programme indicator lights above function buttons A and C go off. The programme indicator light above function button B continues to flash. The digital display shows the current setting. Rinse aid dispenser deactivated 16 electrolux Rinse aid dispenser activated 4. To change the setting, press button B again. The digital display shows the new setting. To memorize the operation, switch off the appliance. If you decide to revert back to the use of individual detergents we advise that you: 1. Fill up the salt container and the rinse aid dispenser again. Adjust the water hardness setting to the highest setting and perform 1 normal washing programme without loading any dishes. Adjust the water hardness setting according to the hardness of the water in your area. Adjust the rinse aid dosage. Select and start a washing programme Important!Set the options before the start of a washing programme. When a washing programme operates, no options can be set. If it is necessary to set an option, cancel the washing programme. Select the washing programme and delay start with the door slightly opened. The start of the programme or the countdown of the delay start will occur only after the closure of the door. Until then it is possible to modify the settings 1. Check that the baskets have been loaded correctly and that the spray arms are free to rotate. Select a washing programme (see 'Washing programmes' chart). When a programme has been selected the corresponding light comes on. Close the appliance door, the programme starts automatically. [. . . ] The total length of the drain hose, including any extension you might add, must be no longer than 4 metres. The internal diameter of the extension hose must be no smaller than the diameter of the hose provided. Our appliances are supplied with a security device to protect against the return of dirty water back into the machine. If the spigot of your sink has a "no return valve" incorporated this can prevent the correct draining of your dishwasher. To avoid water leakage after installation make sure that the water couplings are tight. Electrical connection Warning! [. . . ]