User manual ARTHUR MARTIN AWT5120W

[. . . ] Check the outside of the appliance is not damaged in any way. Report all transit damage to your retailer. ⷠRemove all transit bolts and packaging before installing the appliance. ⷠConnection to the water supply must be carried out by a qualified plumber. [. . . ] Permanent : Hold down the "Spin" and "Option" pushbuttons for a few seconds. The option is permanently activated, even if the appliance is switched off. "Delay start" This option allows you to delay the start of a wash programme by 3, 6 or 9 hours by pressing the . "Delay start" pushbutton Warning!Before closing the lid of your appliance, ensure that the drum is properly closed : · When the two shutters are closed, · locking button A released. Proportioning of detergents Pour the amount of washing powder into the and prewash compartments if you washing have selected the "prewash" option. The "Start/Pause" pushbutton flashes red for a few seconds. Selecting the temperature Turn the temperature selector on the desired temsymbol means a cold wash. The Selecting the spin speed Press the "Spin" pushbutton repeatedly to increase or decrease the temperature if you want your washing to be washed at a different temperature to the one selected by the appliance. 14 electrolux You can change or cancel the delayed start time at any time before you press the "Start/Pause" pushbutton by pressing the "Delay start" pushbutton again (when all indicators are off, the wash programme will start immediately). If you have already pressed the "Start/Pause" pushbutton and you want to change or cancel the delayed start, proceed as follows : · To cancel the delay start and start the cycle immediately, press "Start/Pause" and then "Delay . To change the timer delay period, you must go and reprogthrough the "Stop" position ramme your cycle. The lid will be locked during the delayed start time. If you need to open it, you must first pause the appliance by pressing the "Start/Pause" pushbutton. After closing the lid again, press the "Start/Pause" pushbutton. Start of the programme Press the "Start/Pause" pushbutton to start the cycle ; the corresponding light will come on green. It is normal for the programme selector to remain stationary during the cycle. The light corresponding to the current cycle is illuminated. + : Prewash + Wash + : Rinse + Spin : End of cycle Interrupting a programme Adding washing during the first 10 minutes Press the "Start/Pause" pushbutton : the corresponding light will flash green while the appliance is paused. The lid can only be opened around 2 minutes after the washing machine has come to a stop. Press the "Start/Pause" pushbutton again to continue the programme. Gramme selector to the "Stop" position End of the programme The washing machine stops automatically, the "Start/Pause" pushbutton goes out and the light "End of cycle" comes on. [. . . ] Dispose of them at a waste collection site (enquire at your local council) for collection and recycling. When disposing of your appliance, remove all parts which could be dangerous to others: cut off the power supply cable at the base of the appliance. On the product or on its packaging The symbol indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. [. . . ]