User manual ARTHUR MARTIN AWT6020W

[. . . ] Check the outside of the appliance is not damaged in any way. Report all transit damage to your retailer. ⷠRemove all transit bolts and packaging before installing the appliance. ⷠConnection to the water supply must be carried out by a qualified plumber. [. . . ] To change the timer delay period, you must go through the "Stop" position and reprogramme your cycle. The lid will be locked during the delayed start time. If you need to open it, you must first pause the appliance by pressing the "Start/Pause" pushbutton. After closing the lid again, press the "Start/Pause" pushbutton. Start of the programme Press the "Start/Pause" pushbutton to start the cycle ; the corresponding light will come on green. It is normal for the programme selector to remain stationary during the cycle. The light corresponding to the current cycle is illuminated. + : Prewash + Wash + : Rinse + Spin Warning!Before closing the lid of your appliance, ensure that the drum is properly closed : · When the two shutters are closed, · locking button A released. Proportioning of detergents Pour the amount of washing powder into the washing and prewash compartments if you have selected the "prewash" option. The "Start/Pause" pushbutton flashes red for a few seconds. Selecting the spin speed Press the "Spin" pushbutton to change the spin speed, if you want your washing to be spun at a different speed to the one selected by the appliance. you can also select "No spin" , "Rinse hold" 3). Or "Night silence plus" The maximum speed is 600 rpm for all the programmes. you can also select "No spin" , "Rinse hold" 3). Selecting options You must select the different options after selecting the programme and before pressing the "Start/ Pause" pushbutton (see "Programmes table"). Press the desired button(s) : the corresponding lights come on. If one of the options is not compatible with the selected programme, the "Start/ Pause" pushbutton flashes red. Electrolux 13 : End of cycle Interrupting a programme Adding washing during the first 10 minutes Press the "Start/Pause" pushbutton : the corresponding light will flash green while the appliance is paused. The lid can only be opened around 2 minutes after the washing machine has come to a stop. Press the "Start/Pause" pushbutton again to continue the programme. End of the programme The washing machine stops automatically, the "Start/Pause" pushbutton goes out and the light "End of cycle" comes on. [. . . ] Dispose of them at a waste collection site (enquire at your local council) for collection and recycling. When disposing of your appliance, remove all parts which could be dangerous to others: cut off the power supply cable at the base of the appliance. The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. [. . . ]