User manual ASCOM TEMS POCKET REMOTE DATASHEET

[. . . ] product sheet product: teMsTM Automatic ­ handheld test device GsM/Gprs/edGe/WcdMA/hsdA TEMSTM PockET REMoTE HandHEld TEST dEvicE foR TEMSTM auToMaTic teMs pocket remote collects and uploads network data while working as a normal handset. this allows teMs Automatic to truly test network quality from a subscriber's perspective. the teMs pocket remote package expands the measurement capabilities of the teMs Automatic solution. [. . . ] From the main console, the operator can send test instructions over the air interface to groups of devices. Logfiles are created based on these instructions until they are changed. the test instructions can be changed at any time from the operator's console, giving the operator complete control of the type and frequency of the tests. product sheet: teMs pocket reMote TEMS Pocket Remote specifications Feature TEMS Pocket 7. 2 Remote Mobile phone Positioning Testing capability, Active Testing capability, Passive WCDMA band GSM/GPRS/EDGE band Sony Ericsson w995 Integrated or external Bluetooth® GPS Voice, Idle, HTTP, FTP data, E911 testing Voice, HTTP 850/1900/2100 or 900/1900/2100 MHz 850/900/1800/1900 MHz RAT, (PS) Bearer, Band, Preferred voice codec incl. AMR-WB Control capability Ascom Network Testing Inc. 1943 Isaac Newton square reston | VA | 20190-5006 | usA www. ascom. com/networktesting 11. 2009 © Ascom 2009. All other trademarks are the property of their respective holders. | 4/287 01-FAP 901 0949 Rev A Uen | Photo: Fotograf Paulina teMs pocket remote performs its measurements automatically, with no action required by the person using the handset. testing is invisible; recording takes place in the background of calls either initiated by the user (passive testing), or initiated by the test unit (active testing), with a minimum of impact on the user. For positioning, the phone device uses an integrated Gps or an external Gps. If positioning is not available teMs Automatic will use cell Id to display the measurement information. teMs pocket remote is fully integrated into teMs Automatic, using the same interface mechanisms for uploading and downloading data and presentation of measurement results. the data collected by teMs Automatic using teMs pocket remote units can be used for analyzing trends, optimizing networks, benchmarking competitors, and verifying quality as experienced by the users. [. . . ] It is a simple new way to use teMs Automatic to test from a user's perspective. With handheld devices for quality monitoring, teMs Automatic is even more accurate and cost-effective for operators hoping to maximize network quality. [. . . ]