User manual ASHTON GREEN C123.00-CHEF S MANDOLIN

[. . . ] h. While applying pressure with the palm of your hand on the safety guard A, in one smooth continuous downward motion, push the safety guard A past the fluted cutting blade 3. Waffle cuts: to make waffle cuts rotate the item being cut 90° after every cut. Make sure removable stand 6 is placed in the holes adjacent to handle 1 in its locked position. Remove the black straight cutting blade 2 guard and/or julienne blade D, if installed. [. . . ] See the manufacturer supplied instruction booklet for detailed maintenance instructions. ASHTON GREEN 1-800-609-1188 This is a professional kitchen tool designed to cut in two directions. Please read these instructions before you attempt to use it. Getting To Know Your Mandolin 1 REVERSE SIDE 5 6 2 3 7 8 clockwise. Slide the straight cutting blade 2 towards the fluted cutting blade 3 as far as possible. Re-tighten tension 6 nut by turning it clockwise. Lower fluted cutting blade 3, by using the fluted blade adjustment lever 9 located on the underside of the mandolin, until the desired cutting thickness is achieved e. Firmly grasp mandolin handle 4, on the same end as the fluted cutting blade 3, making sure the cutting blades are facing up. Place the mandolin's opposite handle 1 and rubberized foot of the removable stand 5 on a stable cutting surface (see illustration). Place the safety guard A and the secured item to be cut, making sure an arrow on the safety guard B is facing the direction of the cutting motion (downward), on the mandolin above the straight cutting blade. While applying pressure with the palm of your hand on the safety guard A, in one smooth continuous downward motion, push the safety guard A past the straight cutting blade 2. Repeat as many times as desired. 9 4 10 Legend 1. Fluted Blade Adjustment Lever (REVERSE SIDE) 10. Review the above illustration identifying all parts. The Mandolin is designed for cutting in two directions. Safety guidelines: Use extreme caution - exposed blades are very sharp - keep fingers away. To avoid damaging the julienne cutting blades store in manufacturer supplied case. For more information please refer to the manufacturers instruction manual or call an Ashton Green customer service representative at 1-800-609-1188. 2. Make sure removable stand 5 is placed in the holes adjacent to handle 4 in its locked position. [. . . ] Make sure the 'cross' symbol on julienne blade D is on the same side as the corresponding symbol on the julienne blade lock 8. Slide the julienne lock 8 into place securing the julienne blade D. *NOTE: Use extreme caution the blades are sharp. Turn mandolin over so julienne blade D is facing up. [. . . ]