User manual ASK PROXIMA C185

[. . . ] >>>>>>> C175 C185 User's Guide Declaration of Conformity Manufacturer: InFocus Corporation, 27700B SW Parkway Avenue, Wilsonville, Oregon 97070 USA European Office: Strawinskylaan 585, 1077 XX Amsterdam, The Netherlands We declare under our sole responsibility that this projector conforms to the following directives and norms: EMC Directive 89/336/EEC, Amended by 93/68/EEC EMC: EN 55022 EN 55024 EN 61000-3-2 EN 61000-3-3 Low Voltage Directive 73/23/EEC, Amended by 93/68/EEC Safety: IEC 60950-1: 1st Edition May, 2004 Canada This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. Agency Approvals UL, CUL, TUV Other specific Country Approvals may apply, please see product certification label. This user's guide applies to models IN32, C175, W320, IN34, C185, W340 InFocus reserves the right to alter product offerings and specifications at any time. Trademarks Microsoft, PowerPoint, Word, Excel and Windows are trademarks or registered trademarks of Microsoft Corporation. Adobe and Acrobat are trademarks or registered trademarks of Adobe Systems Incorporated. [. . . ] Turn the projector's display messages on and off. Specify blank screen colors and startup logos. Control your projector using RS-232 commands. · · · · · · · · Presentation features Several features are provided to make giving presentations easier. The following is an overview, details are found in the menu section on page 24. · · · The Custom key, available on several optional remotes only, allows you to assign various features to the button. The Startup Logo menu option lets you change the default startup screen to a black, white, or blue screen. Two menu options, Power Save and Screen Save, are provided to automatically shut down the projector after several minutes of inactivity or display a blank screen. See page 29. Optimizing video images After the video device is connected properly and the image is on the screen, you can optimize the image using the onscreen menus. For general information on using the menus, see page 24. 23 Using the menus To open the menus, press the Menu button on the keypad or remote. (The menus automatically close after 60 seconds if no buttons are pressed. ) The Main menu appears. Use the arrow buttons to move up and down to highlight the desired submenu, then press the Select button. To change a menu setting, highlight it, press Select, then use the up and down arrow buttons to adjust the value, select an option using radio buttons, or turn the feature on or off using check boxes. Use the arrows to navigate to another setting. When your adjustments are complete, navigate to Exit, then press Select to go to the previous menu; press the Menu button at any time to close the menus. The number of dots indicate the menu's level, ranging from one (the Main menu) to four (the most nested menus). The menus are grouped by usage: · · · The Picture menu provides image adjustments. The Settings menu provides set-up type adjustments that are not changed often. The Source Info menu provides a read-only display of information about the projector and source. Picture menu Settings menu Main menu Menu button Keypad navigation buttons Dots Certain menu items may be grayed out until a particular source is connected. For example, Sharpness is only available for video sources and will be hidden when a computer source is active. Other menu items may be grayed out when they are not available. For example, Brightness is grayed out until an image is active. Source Info menu 24 Picture menu To adjust the following six settings, highlight the setting, press Select, use the up and down arrows to adjust the values, then press select to confirm the changes. increasing keystone decreasing keystone Keystone: adjusts the image vertically and makes a squarer image. [. . . ] Use only a replacement lamp with the same type and rating as the original lamp. Service Info menu turn off and unplug the projector 1 Turn off the projector and unplug the power cable. 2 Wait 60 minutes to allow the projector to cool thoroughly. wait 60 minutes 3 Turn the projector upside down and remove the lamp door by placing a flat-blade screwdriver into the space between the lamp door and the projector and gently prying the door off. pry the lamp door off 4 Loosen the captive screw on the lamp module. WARNINGS: · · · · To avoid burns, allow the projector to cool for at least 60 minutes before you replace the lamp. Unplug the power cord before replacing the lamp. Fingerprints can obscure projection sharpness. loosen the screw on lamp module 33 · Be extremely careful when removing the lamp housing. [. . . ]