User manual ASK PROXIMA C460

[. . . ] >>>>>>> User's Guide Declaration of Conformity Manufacturer: InFocus Corporation, 27700B SW Parkway Ave. Wilsonville, Oregon 97070 USA European Office: Strawinskylaan 585, 1077 XX Amsterdam, The Netherlands We declare under our sole responsibility that this projector conform to the following directives and norms: EMC Directive 89/336/EEC, Amended by 93/68/EEC EMC: EN 55022 EN 55024 EN 61000-3-2 EN 61000-3-3 Low Voltage Directive 73/23/EEC, Amended by 93/68/EEC Safety: EN 60950: 2000 October, 2003 Canada This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. Agency Approvals UL, CUL, TUV, GOST Other specific Country Approvals may apply, see please product certification label. Remote Control Warning Laser radiation class II product; wavelength 650nm; maximum output 1mW. Remote control complies with applicable requirements of 21 CFR 1040. 10 and 1040. 11. [. . . ] Specify the function of the Effect Key on the remote. Turn the projector's on-screen display messages on and off. Specify blank screen colors and startup logos. Manage your projector via ProjectorNet software. Control your projector using RS232 commands. Customize the projector for your specific installation using optional long or short throw lenses. See the inside back cover of this User's Guide for ordering information. Gain control of your projector from your laptop with InFocus ProjectorManagerTM, a free application that turns any PC into an advanced projector remote control. ProjectorManager can be downloaded from our website link found on the CD that came with your projector. · · · 30 Using the menus Dot To open the menus, press the menu button on the keypad or remote. (The menus automatically close after 60 seconds if no buttons are pressed. ) The Main menu appears. Use the arrow buttons to move up and down to highlight the desired submenu, then press the Select button. To change a menu setting, highlight it, press Select, then use the up and down arrow buttons to adjust the value, select an option using radio buttons, or turn the feature on or off using check boxes. Use the arrows to navigate to another setting. When your adjustments are complete, navigate to Previous, then press Select to go to the previous menu; press the Menu button at any time to close the menus. The number of dots indicate the menu's level, ranging from one (the Main menu) to four (the most nested menus). The menus are grouped by usage: · · · The Picture menu provides image adjustments. The Settings menu provides set-up type adjustments that are not changed often. The About menu provides a read-only display of information about the projector and source. Menu button Main menu Keypad navigation buttons Picture menu Dots Settings menu Certain menu items may be grayed out until a particular source is connected. For example, Sharpness is only available for video sources and will be hidden when a computer source is active. Other menu items may be grayed out when they are not available. For example, Brightness is grayed out until an image is active. About menu 31 Picture menu To adjust the following six settings, highlight the setting, press Select, use the up and down arrows to adjust the values, then press select to confirm the changes. Zoom: allows you to adjust a lens to zoom in and out. [. . . ] InFocus shall have 55 DISCLAIMER OF UNSTATED WARRANTIES THE WARRANTY PRINTED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE ARE DISCLAIMED. THERE ARE NO WARRANTIES THAT EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF AND THE FOREGOING WARRANTY SHALL NOT BE EXTENDED, ALTERED OR VARIED EXCEPT BY WRITTEN INSTRUMENT SIGNED BY INFOCUS. SOME JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY MAY LAST, SO SUCH LIMITATIONS MAY NOT APPLY TO YOU. [. . . ]