User manual ASK PROXIMA DP2810

[. . . ] USER'S GUIDE Multimedia LCD Projectors Halogen Models This manual covers all of the Desktop Projector halogen models. These projectors have many aspects in common. Unless otherwise indicated, the information contained within this manual is common to all models. Warranty Proxima Corporation warrants that the Proxima® Desktop ProjectorTM product manufactured by Proxima is free from defects in materials and workmanship under normal use during the Warranty Period. The Warranty Period commences on the day of purchase by the end-user. [. . . ] Insert the other yellow RCA plug into the projector's VIDEO IN port. The red and white cables are for audio input from the video source. Refer to the AUDIO IN section later in this chapter. S­VHS Audio/video-enabled models can project video from an S-VHS or S-Video source. Connect one end of the S-Video (Y-C) cable (C466­6) to your video source connector marked VIDEO OUT, TO MONITOR, or something similar. The cable has identical round 4-pin connectors on either end. Connect the other end of the cable to the Desktop Projector's input connector marked S-VHS. Note: With the installation of an optional Video Adapter Kit (A195), audio-enabled models can also display video images from an NTSC, PAL, or SECAM source. Appendix B explains how to order accessories such as the adapter kit. User's Guide · 2­13 Chapter 2 · Detailed Setup COMPUTER AUDIO IN The COMPUTER AUDIO IN connector allows all Desktop Projector models to receive audio input from a computer or a microphone. Connecting Your Computer's Audio 1. Insert the mini jack end of the computer audio cable (C498-6) into the AUDIO OUT connector of a Macintosh or the sound card of an IBM compatible. Insert the RCA jacks at the other end of the computer audio cable into the projector's left and right COMPUTER AUDIO IN connectors. AUDIO IN All Desktop Projector models have left and right stereo connectors for audio input from VCRs, laserdisc players, and other video equipment, or from a microphone. Connecting a Video Audio Source The composite audio/video cable (C497-6) is made up of 3 cables with yellow, red, and white RCA plugs. Insert a white RCA plug into your video source's left AUDIO OUT connector. Insert the other white RCA plug into the projector's left AUDIO IN port. Insert a red RCA plug into your video source's right AUDIO OUT connector. Insert the other red RCA plug into the projector's right AUDIO IN port. 2­14 · User's Guide Chapter 2 · Detailed Setup Note: Although both COMPUTER AUDIO IN and AUDIO IN may be connected simultaneously, only one is active. · If computer video is selected, COMPUTER AUDIO IN is active. · If NTSC/PAL/SECAM/S-VHS video is being viewed, AUDIO IN is active. Connecting a Monaural Source If you have a monaural source that you want to play through the Desktop Projector's left and right speakers, use the RCA "Y" adapter cable (C496) to connect the source to the projector's left and right AUDIO IN connectors. If you are using computer audio, connect the source to the projector's Left and Right COMPUTER AUDIO IN connectors. Connecting a Microphone When you need to address a larger audience while projecting an NTSC, PAL, SECAM or S-VHS video image, plug an amplified or wireless microphone equipped with a line level output (maximum level of 1 volt, peak-to-peak) into the Left and Right AUDIO IN connectors. The microphone will work when an NTSC, PAL, SECAM or S-VHS video image is projected. If you wish to address a larger audience while projecting a computer image, connect the source to the projector's Left and Right COMPUTER AUDIO IN connectors. If your microphone's amplifier has only one output, use the RCA "Y" adapter cable (part number C496) and a standard RCA cable to connect it to both of the projector's AUDIO IN or COMPUTER AUDIO IN connectors. User's Guide · 2­15 Chapter 2 · Detailed Setup AUDIO OUT All Desktop Projector models contain an internal stereo system consisting of an amplifier and two speakers. Although this system provides high quality stereo output, a multimedia presentation may require connecting the projector to external powered speakers or an external sound system. External Speakers When connecting external speakers, use the optional Proxima Powered Loudspeaker System (part number A55) or a similar system. References in the following procedure are to Figure 2-12. To connect your Desktop Projector to external powered speakers: 1. [. . . ] Remove the old batteries and replace them with new ones. Make sure to align the batteries in the proper direction. Figure 4-10 Installing batteries 3. Replace the cover on the battery compartment. User's Guide · 4­9 Chapter 4 · Maintenance Temperature Extremes The projector should not be stored in excess of 140° F (60° C). The ideal operating temperature is below 80° F (27°C). [. . . ]