User manual ASK PROXIMA DP4100

[. . . ] Proxima Desktop Projector 4100/4200 User's Guide (not actual cover) Warranty Proxima Corporation warrants that the Proxima® Desktop ProjectorTM product manufactured by Proxima is free from defects in materials and workmanship under normal use during the Warranty Period. The Warranty Period commences on the day of purchase by the end-user. The projector lamp is not covered by this Warranty. Each Proxima product is manufactured from new parts, or new and some used parts. [. . . ] In Host Mode, a mouse connected to the projector functions as the system mouse. It communicates with the computer or the MediaExpress system and controls the screen cursor for all computer and MediaExpress functions. Host Mode can only be used when the projector's menu and the LightBoard tool are not active. Please refer to the Cyclops User's Guide for more information on using a mouse with Cyclops. Using the Desktop ProjectorTM 4100/4200 3-13 THE GRAPHICAL USER INTERFACE Your DP4100/4200 features a graphical user interface that makes it easy to control all of the projector's functions. Menu selections can be made with the control panel, Cyclops remotes or pointer, or your computer mouse. NOTE: Menus will change based on the type of video source you have connected. Using the Menus with the Control Panel or Cyclops Remote 1 Press the MENU key to display the on-screen menus. 2 Press the v and w arrow keys to select the desired menu item. An item is highlighted when it is selected. 3 Use the and arrow keys to move across the menus. 4 Use the v and w arrow keys to move down a menu column or to change a menu value. 5 Press the MENU key again to close the menu or wait five seconds and they will automatically disappear. Settings are automatically saved when you exit the menus. Menu Selection Using a Mouse If a Microsoft-compatible mouse is connected to the projector's AUX port, menu selections are even easier. When the menus are open, simply point to the desired item and click to select or change it. Using the Menus with the Cyclops Interactive Pointer System For the ultimate in ease-of-use, you can use the optional Cyclops interactive pointer system to control the menus and the LightBoard tool in Local Mode, and the attached computer in Host Mode. NOTE: You must first calibrate the Cyclops interactive pointer system. · To open or close the menus, simply point the Cyclops wand or laser pointer just to the left or right of the projected image and hold the button down until the menus appear or disappear. As with a Microsoft-compatible mouse, you can control the menus with a point and click. 3-14 Chapter Three · To open or close the LightBoard tool, simply point the Cyclops wand or laser pointer just above the projected image and hold the button down until the LightBoard tool bar appears or disappears. Click here with Cyclops for LightBoard Click on either side of display for menus to be displayed Figure 3-7 Using Cyclops to activate the menus and LightBoard USING THE MAIN MENU When the MENU key is pressed or when the Cyclops pointer or a mouse are used to open the menus, the Main menu appears at the top of the screen. Menus Tools Input Source Image Audio Preferences Advanced Figure 3-8 Main menu To turn the menu off, press the MENU key again or click on the Menu title bar with the Cyclops pointer or the mouse. The menu displays only those items that are relevant to the selected input source (computer, video, or S-Video). The following table lists the main menu options that you can select: Using the Desktop ProjectorTM 4100/4200 3-15 MENU Tools Input Source Image ACTIONS Selects a projector tool for use. Selects a video source and adjusts the settings of an incoming signal. Adjusts the display settings, selects the option for rear or ceiling projection. Audio Preferences Controls the audio (volume, balance, etc. ). Programs a custom key on the Cyclops remote control or changes the language of the menu display. Advanced Provides advanced projector functions. SELECTING A TOOL The Tools menu is used to set up and activate: · The LightBoard tool · The Cyclops interactive pointer · The Timer Menus Tools Input Source Tool Select LightBoard Cyclops Image Audio Preferences Timer Advanced Figure 3-9 Tool Select menu Using the LightBoard Tool The LightBoard tool allows you to highlight text or other objects on the screen and draw on a white or black background with the Cyclops remote control or pointer, or a mouse. 3-16 Chapter Three 1 From the Tool Select menu, select the LightBoard tool. Menus Tools Input Source Tool Select LightBoard Cyclops Mode Overlay WhiteBoard LightBoard Off On Image Audio Preferences Timer BlackBoard Advanced Figure 3-10 LightBoard Tool menu Using the LightBoard 2 Select a LightBoard mode. Overlay WhiteBoard Uses the Draw tool to highlight or annotate the displayed image. Clears the screen and provides a white background for the Draw tool. BlackBoard Clears the screen and provides a dark background for the Draw tool. 3 Select ON on the LightBoard menu. The Draw toolbar appears in the upper left of the display. Figure 3-11 Toolbox 4 The currently selected tool (Draw or Erase) is highlighted and a cursor appears. Use the Cyclops wand, optional laser pointer, remote control, or a Microsoft-compatible mouse to draw on the screen. Using the Desktop ProjectorTM 4100/4200 3-17 Draw Tool Bar The Draw tool bar has four options: Pencil Click to select the Drawing tool. [. . . ] 3 Replace the cover on the battery compartment. Figure 5-4 Installing batteries Maintenance 5-3 CHANGING BATTERIES ­ CYCLOPS QUICK REMOTE The Cyclops Quick Remote uses two 357A alkaline batteries. 1 Locate the battery compartment at the lower rear of the case. 2 Remove the old batteries and replace them with new ones. Make sure to align the batteries in the proper orientation. [. . . ]