User manual ASK PROXIMA DP6800

[. . . ] In some cases, the product may have been delivered to another end-user and then returned. In all cases, the product has undergone testing and quality inspection, and Proxima's full warranty terms apply. The end-user's sales receipt or invoice showing the date of purchase of the product and the name of the Reseller is proof of date of purchase. The Warranty extends only to the original purchaser and is not transferable. [. . . ] Press the bottom of the button again to restart the presentation. Cyclops Quick Remote The Cyclops Quick Remote allows you to control the most often used projector functions. NOTE: Several of the remote control functions require the installation of Proxima's Cyclops F/X software (see Chapter 4). KEY FUNCTION Moves a presentation (PowerPoint, Freehand, etc. ) forward or back one frame. This function can only be used if Cyclops F/X is installed. Preview Allows you to preview an image from a presentation (PowerPoint, Persuasion, etc. ) if Cyclops F/X and a separate monitor are installed. Refer to the See It/Show It feature in Chapter 4 for more information. Selects a pre-programmed projector feature that you can choose from the Preferences menu (see page 3-27). Switches between connected sources. Select Source OPERATING THE PROJECTOR The DP6800/4200 is simple to control using the control panel, Cyclops remotes or pointer, or your computer mouse. 3-12 Chapter Three Using the Control Panel and Cyclops Remote Controls The control panel and Cyclops remote controls provide access to all of the projector's features. Simply press a key to select a function or to navigate through the menus. The remote controls can also be used to control the Cyclops F/X software (see Chapter 4). Using a Microsoft-Compatible Mouse You can use a Microsoft-compatible mouse to control the menus and the LightBoard® tool in Local Mode. The mouse must be connected to the AUX port on the projector before powering up the projector (see page 2-13). Operating Modes The DP6800/4200 can operate in Local or Host Mode. Local Mode Any time you activate the projector's menus or the LightBoard tool, the projector is in Local Mode. In Local Mode, the mouse or Cyclops remotes can be used for projector menu and LightBoard functions only; they do not communicate with the computer. In Local Mode, the projector mouse, Cyclops remotes or Cyclops pointer can be used to: · Move through the projector menus. The Draw toolbar appears in the upper left of the display. Figure 3-11 Toolbox 4 The currently selected tool (Draw or Erase) is highlighted and a cursor appears. Use the Cyclops wand, optional laser pointer, remote control, or a Microsoft-compatible mouse to draw on the screen. Using the Desktop ProjectorTM 4100/4200 3-17 Draw Tool Bar The Draw tool bar has four options: Pencil Click to select the Drawing tool. You can erase portions of your highlights. Clear All Click to erase all previous highlighting. This button also shows the currently selected color. Choosing a Color 1 Click the top color box or the down arrow in the upper right corner of the Draw tool bar to display the color palette. Figure 3-12 Toolbox Color palette 2 Click the color you want to use. The Color box takes on the selected color, and the color palette remains on the screen. 3 Click the Color box or the down arrow in the upper right corner again to turn the color selection boxes off. 3-18 Chapter Three 4 To draw, click and hold down the Cyclops wand or laser pointer button, mouse button, or remote control mouse disc at the desired starting point. Draw with the cursor and release the mouse or wand button to end a draw motion. 5 To exit Draw, click the small box in the upper left corner of the Draw tool bar. The Draw tool bar can be moved to another location on the screen. With the mouse, Cyclops wand, or remote control, click and hold on the top of the tool bar. [. . . ] Protect it from potential fluid spills. CHANGING REMOTE CONTROL BATTERIES To install or change the two AAA alkaline batteries in the remote control unit: 1 Locate the battery compartment at the lower rear of the case. Slide the cover off the battery compartment. 2 Remove the old batteries and replace them with new ones. Make sure to align the batteries in the proper orientation (see Figure 5-4). [. . . ]