User manual ASKO 1595 QUICK START GUIDE

[. . . ] Norm wash For normal wash loads. Options When used with the low temperature settings, this option further reduces energy consumption without diminishing cleaning performance by lowering the water temperature in the prewash and main wash and extending the wash time. Temp Lets you select a high or low water temperature for the wash programs. (See "Temperature Options" on the next page. ) The indicator light glows when it's on the high setting and remains off when it's on low. [. . . ] After you've pushed the baskets back inside the unit, manually rotate the upper and lower spray arms to be sure they turn freely. Make sure there is rinse aid in the dispenser. Add automatic dishwashing detergent and close the dispenser cover. (See "Amount of Dishwashing Detergent to Use" below. ) 5. Select the desired wash program and option(s). A red light appears above the selected touchpad(s). The dishwasher will start. Refer to this page in the Use & Care Guide. 3, 4 3 5, 6 4, 5 AMOUNT OF DISHWASHING DETERGENT TO USE We recommend that you use only unscented, granular automatic dishwashing detergent. Generally, one tablespoon of detergent is needed for a normal wash load. More heavily soiled items, however, may need more detergent. Also, the amount of detergent needed can vary due to differences in water hardness. The harder the water, the more detergent you may need. (See page 5. ) In any case, you should never use more than three tablespoons of detergent. LED WINDO W DISPLAYS WINDOW DISPLAY empera ture Temper a tur e Settings The wash programs (except Rinse) have water temperature options, as shown in the table to the right. The LED displays the temperature selections in degrees Celsius. The table gives both the Celsius and Fahrenheit temperatures. Once you select a temperature, it will remain selected until you change it (except the Quick wash programs, which reverts to 130° F). We recommend that you use the lower temperature settings whenever possible to conserve energy. Wash Program Pots and Pans Normal Quick Temperature Options 55° C (130° F) 55° C (130° F) 45° C (110° F) 70° C (160° F) 65° C (150° F) 55° C (130° F) Program Time When a program starts, the LED displays the time it took that program to run last time. As the program runs, the LED displays the remaining time. [. . . ] If you used the high temperature options and the heat dry option, those lights will come on, too. If all of the lights on the control panel flash in sequence, this means the machine has detected an overfill. (See page 7. ) Should this happen, call the ASKO Advisory Center. COMMONLY QUESTIONS COMMONLY ASKED QUESTIONS 1) 2) 3) 4) 5) Why does my dishwasher run so long? [. . . ]