User manual ASKO D1876 QUICK START GUIDE

[. . . ] To select a wash program or option, simply press the appropriate touchpad. When you press a touchpad, a red indicator light at the upper left of the touchpad glows to show that you selected that program or option. Touchpad Controls Press these touchpads to select programs and options. Indicator Lights These lights glow red to indicate which program and options you have selected. LED Window The LED window has four functions: to display temperature settings, program run time, delay time, and fault codes. Start After you've selected the desired wash program and options, press this touchpad to start the dishwasher. WASH PROGRAMS AND OPTIONS Your ASKO dishwasher has several wash programs and options specifically designed to reduce your energy costs and make your life easier. Press the touchpad(s) to select the desired program and option(s). [. . . ] Simply scrape off large food particles before you load the dishes. ) After you've pushed the baskets back inside the unit, manually rotate the upper and lower spray arms to be sure they turn freely. Rearrange any item that blocks the wash arms. Make sure there is rinse aid in the dispenser. Add automatic dishwashing detergent and close the dispenser cover. (See "Amount of Dishwashing Detergent to Use" below. ) Close the door securely. (You should hear it click shut. ) Press the touchpad for the desired program and options. The red indicator light for the program and options selected will come on. The dishwasher will start. Refer to this page in the Use & Care Guide. 3, 4 3 5, 6 4, 5 AMOUNT OF DISHWASHING DETERGENT TO USE We recommend that you use only unscented, granular automatic dishwashing detergent. Generally, one tablespoon of detergent is needed for a normal wash load. More heavily soiled items, however, may need more detergent. Also, the amount of detergent needed can vary due to differences in water hardness. The harder the water, the more detergent you may need. (See page 5. ) In any case, you should never use more than three tablespoons of detergent. LED WINDOW DISPLAYS Temperature Settings The wash programs (except Rinse) have water temperature options, as shown in the table to the right. The LED displays the temperature selections in degrees Celsius. The table gives both the Celsius and Fahrenheit temperatures. Once you select a temperature, it will remain selected until you change it (except the Quick wash programs, which reverts to 130° F). We recommend that you use the lower temperature settings whenever possible to conserve energy. Wash Program Pots & Pans/Sani Normal Quick Temperature Options 55° C (130° F) 55° C (130° F) 45° C (110° F) 70° C (160° F) 65° C (150° F) 55° C (130° F) Program Time When a program starts, the LED displays the time it took that program to run last time. As the program runs, the LED displays the remaining time. If the time exceeds an hour, the display alternates between the hour and minutes remaining. [. . . ] If all of the lights on the control panel flash in sequence, this means the machine has detected an overfill. (See page 7. ) Should this happen, call the ASKO Advisory Center. COMMONLY ASKED QUESTIONS 1) 2) 3) 4) 5) Why How Why Why Why does my dishwasher run so long?is there always water left in the bottom of my machine? WHERE TO FIND THE ANSWERS 1) 2) 3) 4) 5) See See See See See page 8 in the Use and Care Guide. "Understanding the Indicator Lights" above. [. . . ]