User manual ASROCK MARVELL SATA3 RAID

[. . . ] The Marvell RAID adapter supports the following RAID levels: · RAID 0 (striping). Multiple drives can read and write data in parallel to increase performance. Two disks mirrored to each other. 1 Installation Insert ASRock support CD to the optical drive. [. . . ] For the MRU to function properly in the browser, Active Scripting must be enabled in your default browser. To enable Active Scripting in Internet Explorer 1. Select Tools > Internet Options > Security > Custom Level. Under Scripting and check the radio button for Active Scripting. Note: Active Scripting is disabled by default in Internet Explorer distributed with Windows 2008. 6 Local Adapter You can access and control local adapters using the MRU Browser GUI. This section describes the procedure to launch the GUI on Windows. You can use the desktop shortcut and the system tray icon to launch the MRU in your default browser. When launched, your default browser opens and displays the MRU login page. Remote Adapter You can access and control remote adapters using the MRU Browser GUI. Type the following web address in the address bar. http://*Your IP Address*:8845/MRU/JumpPage. php?Target=LoginPage Note: Alternatively, you can use the system name instead of the IP address in most internal network environments. 7 Login Screen When you first start the MRU, you are prompted for a username and password. MRU user accounts and their permissions follow the OS user accounts and their permissions. Only user accounts with administrator privileges have access to all permissions. Non-administrator users have view-only permissions. Then the first page appears. 8 Create RAID Click "Operation". Click "Create VD". Double-click the HDDs that you want to create RAID. Select the RAID level. 9 Key-in the RAID name. Click "Submit". RAID function is created successfully. You can see the information on this page. 10 For the further information or questions, please click the "Help" icon the right-top of the screen. 11 Marvell RAID ROM Besides Marvell SATA3 RAID utility, you can also use Marvell RAID ROM to configure RAID functions. First of all, you need to make a SATA3 driver diskette. Press <Ctrl>+<M> during the POST to enter Marvell BIOS Setup screen. In Marvell BIOS Setup screen, select free disks to create array and continue to create virtual disk on this array. [. . . ] Install a new hard disk to replace the failed hard disk. In this situation, you can use Rebuild function to save your lost data. Choose <Rebuild> and press <Enter>. Select the free disk by pressing the space bar. [. . . ]