User manual ASROCK S330SERIES USER MANUAL

[. . . ] NetTop S330 Series User Manual Version 1. 0 Published April 2009 Copyright©2009 ASRock INC. All rights reserved. 1 Copyright Notice: No part of this manual may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners' benefit, without intent to infringe. Disclaimer: Specifications and information contained in this manual are furnished for informational use only and subject to change without notice, and should not be constructed as a commitment by ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this manual. [. . . ] You may choose a different folder if you need, and click "Next". c. You may choose a different folder if you need, and click "Next". 20 d. Click "Install" to begin installing Instant Boot driver. e. Click "Finish" to complete and exit the setup. C. After the installation is completed, you will find an ASRock Instant Boot icon on the Windows® desktop. D. Double click ASRock Instant Boot icon on the desktop, then Instant Boot main menu will pop up. E. On Instant Boot main menu, you can choose "Fast Mode", "Regular Mode" or "Disable Instant Boot". After that, please click "Apply" to save the change. Please notice that you need to keep AC power on if you select "Fast Mode". When you want to shut down the computer, please simply select "Shut Down" from Windows® "Start menu". Now, the system will restart once automatically. After reentering into OS, the system will shutdown again. 21 H. Next time when you turn on your system, you can enjoy the benefit of Instant Boot. 5. 2 ASRock Tuner ASRock OC Tuner 5. 2. 1 Introduction ASRock OC Tuner is a user-friendly overclocking tool which allows you to guard your system by hardware monitor function and overclock your hardware devices to get the best system performance. There are 3 major sections that are easy to fine-tune and monitor: Overclocking, Voltage Control, and Hardware Monitor. In Overclocking section, you are allowed to overclock CPU/PCI frequency for optimal system performance. In Voltage Control section, you can adjust voltage for CPU, DRAM, and VTT to enhance compatibility and the boost overclocking. In Hardware Monitor section, it shows the major readings of your system. 5. 1. 2 Installation Please read below procedures carefully before you install ASRock OC Tuner. Install ASRock OC Tuner driver from ASRock support CD, or you may click following link to get the latest utility: http://www. asrock. com/feature/OCTuner/download. asp B. Execute the ASRock OC Tuner installation program under Windows®. Please follow the instructions on Instant Boot setup page. Click "Next" to continue. 22 b. You may choose a different folder if you need, and click "Next". c. [. . . ] Enabled: Displays OEM Logo instead of POST messages. +F1 F9 F10 ESC Select Screen Select Item Change Option General Help Load Defaults Save and Exit Exit v02. 54 (C) Copyright 1985-2003, American Megatrends, Inc. Full Screen Logo Use this item to enable or disable OEM Logo. AddOn ROM Display Use this option to adjust AddOn ROM Display. If you enable the option "Full Screen Logo" but you want to see the AddOn ROM information when the system boots, please select [Enabled]. Configuration options: [Enabled] and [Disabled]. [. . . ]