User manual ASROCK Z87 EXTREME6/AC

[. . . ] Copyright Notice: No part of this documentation may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc. Products and corporate names appearing in this documentation may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe. Disclaimer: Specifications and information contained in this documentation are furnished for informational use only and subject to change without notice, and should not be constructed as a commitment by ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this documentation. [. . . ] Make sure that the "PCI Device Power On" is enabled in UEFI SETUP UTILITY > Advanced > ACPI Configuration. 1 Configuring and Using MeshCentral MeshCentral allows you to remotely wake up a PC from any network using a single web site. Just download and install the mesh agent on your computers and your computers will show up in the "My Devices" section of MeshCentral. If you have not created a MeshCentral acount, go to MeshCentral. english 42 Step 2 Click the "My Account" tab. Then click on "New" to create a new mesh. Z87 Pro3 Step 3 A new mesh window will pop up. Step 4 Select all the checkboxes and click Create Mesh. downloading and Installing Mesh Agent Step 1 Click Install on the My Account page. Step 2 Step 3 Right-click on the MeshAgent. 43 English Select the mesh and download both files. Make sure both files are in the same directory. Step 5 Wait a minute for the New Machine to appear in "My Device". Before waking up your home computer using a mobile device, please log out of MeshCentral on other previously used computers or devices. 2 Configuring and Using Splashtop Splashtop is a remote desktop access software that lets you remotely access your home computer from your mobile device. Before configuring this feature, verify that the "Remote Wake" has been enabled in "Intel® Smart Connect Technology Manager". Setup Guide Step 1 Download and install Streamer on your home computer, which is located in the folder at the following path of the Support CD: \ ASRock Utility > Splashtop Streamer. If you have not created a Splashtop acount, create one. Step 2 Download and install “Splashtop 2” on your mobile device and log into the app. Using Remote Wakeup Step 1 In "Splashtop 2”, tap the edit button next to an offline machine from the list. Step 2 Tap "Wake up this computer". 47 English Using Remote Control Step 1 In "Splashtop 2”, tap an online machine from the list to connect to your home computer. [. . . ] If you are using Windows 8 64-bit and all of your devices support UEFI, you may also disable CSM for faster boot speed. English 84 Z87 Pro3 Launch PXE OpROM Policy Select UEFI only to run those that support UEFI option ROM only. Select Legacy only to run those that support legacy option ROM only. Launch Storage OpROM Policy Select UEFI only to run those that support UEFI option ROM only. [. . . ]