User manual ASUS A40JV

[. . . ] IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners' benefit, without intent to infringe. ii Contents Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Press <Esc> to return to the main screen. Initial View ASUS Host Management Controller Setup Menu Set Monitor Help No Support Systen Event Log: (Hex) 01 00 02 09 4E 98 45 20 00 04 02 3A 01 50 19 09 1/202 Record ID : 0001h Record Type : 02h (System Event Record) Date & Date : Fri Jan 21 20:43:00 2011 General ID : 2008h EvM Rev : 04h (IPMI 1. 5) Sensor Type : 02h (Voltage) Sensor Number: 3Ah (+1. 1V_IOH) Event Dir : 01h (Threshold) Event Datal : 50h Event Value : 19h (0. 2 V) Threshold : 09h 1. 0 V) Offset: Lower Non-critical - going low : Select Menu ESC: Exit Up/Down KCS 3-22 Chapter 3: ASUS Remote Console To view the System Data Record (SDR): 1. Select BMC SDR from the View command option, then press <Enter>. A complete list of data records appears on the left pane. The right pane displays the sensor data information. The number on the bottom left of the screen indicates the data record displayed in the right window pane over the total number of sensor data records in the remote host. Initial View ASUS Host Management Controller Setup Menu Set Monitor Help Record ID : SDR Version : Record Type : Owner ID/Lun : Sensor Number : Sensor Initial: Capabilities : Sensor Type : Event Type : Assert Mask : Deassert Mask : Reading Mask : Nominal Read : Upper Critical: Upper Warning : Lower Warning : Lower Critical: ID String : Up/Down No Support Sensor Data Record:(Hex) 01 00 02 09 4E 98 45 20 00 04 02 3A 01 50 19 09 01 00 02 09 4E 98 45 20 00 04 02 3A 01 50 19 09 01 00 02 09 4E 98 45 20 00 04 02 3A 01 50 19 09 01 00 02 09 4E 98 45 20 00 04 02 3A 01 50 19 09 1/28 0001h 51h 01h (Full Sensor Record) 20h/08h 31h (CPU1 Temperature) 7Fh 68h 81h (Temperature) 01h (Threshold) 0280h 3200h 1010h 20h (40 ºC) 50h (80 ºC) 50h (80 ºC) 18h (24 ºC) 18h (16 ºC) CPU1 Temperature KCS : Select Menu ESC: Exit 2. 3. Use the down arrow key to display the next sensor data record. Press <Esc> to return to the main screen. ASUS ASMB6-iKVM 3-23 To view the BMC information: 1. Select BMC Info from the View command option, then press <Enter>. A list of BMC information appears on the left pane. Use the down arrow button to select a BMC information. The BMC information is displayed in the right pane. Initial IPMI SEL SDR BMC View ASUS Host Management Controller Setup Menu Set Monitor Help No Support Information Information Information Real Time Clock Device ID : 20h Device Revision : 01h (No SDR) Firmware Revision : 1. 04 IPMI Version : 2. 0 Manufacturer ID : 001043h Product ID : 0B43h IPMI Device Support: Chassis Device -> Support Bridge -> No Support IPMB Event Generator -> Support FRU Inventory Device -> Support SEL Device -> Support SDR Repository Device -> Support Sensor Device -> Support : Select Menu ESC: Exit Up/Down KCS 3. Press <Esc> to return to the main screen. 3. 2. 5 Set ASUS Host Management Controller Setup Menu Set Monitor Help Host Interface BMC Timer No Support The Set command controls the host interface type and the correct BMC time. Initial View 3-24 Chapter 3: ASUS Remote Console To select the host interface: 1. Then click Login. 4-2 Chapter 4: Web-based user interface 4. 1. 2 Using the utility The web-based graphics user interface displays when you login in the utility successfully. 4. Menu bar: Click a menu to display available function lists. Function list: Click each function key to start using its specific functions. Function title: Displays the function title. Help menu: Click to display the brief description of the selected function. ASUS ASMB6-iKVM 4-3 4. 2 FRU Information This section contains detailed information for various FRU deviced present in this system. 4. 3 Server Health This section contains the data related to the server health, such as the Sensor Readings, Event log and System and Audit Log. Click each function key to start using its specific functions 4-4 Chapter 4: Web-based user interface 4. 3. 1 Sensor Readings (with Thresholds) The Sensor Readings page displays the system sensor information, including readings and status. 1 2 3 1. 3. Select a sensor type category: Allows you to select the type of sensor readings to be displayed in the list. Status List: Show the type of sensor readings list that you selected in the drop-down list. Live Widget: Click to enable or disable the Live Widget function. 4. 3. 2 Event Log The Event Log page displays a table of system event log. 1 2 1. Select an event log category: Allows you to select the type of events to be displayed in the list. Clear Event Log: Click to clear the event log. ASUS ASMB6-iKVM 4-5 4. 4 Configuration This section allows you to configure the system settings. [. . . ] If the client and host languages are different, then for all the languages other than English mentioned above, you must select the appropriate language in the list shown in JViewer and use the softkeyboard to avoid typo errors. Note: Soft keyboard is applicable only for JViewer Application not for other application in the client system. Soft keyboard is applicable only for JViewer Application not for other application in the client system ASUS ASMB6-iKVM 4-37 4. 5. 2 Server Power Control The Server Power Control page displays the current server power status and allows you to change the current settings. Select the desired option, and then click Perform Action to execute the selected action. 4. 5. 3 Chassis Identify Command The Chassis Identify Command page allows you to perform a chassis identify command control operation. [. . . ]