User manual ASUS AAM6020BI-T4

[. . . ] 4 The DSL Link LED continues to blink but does not go solid 5. Your LAN (Local Area Network) will now be able to access the Internet via the CPE's ADSL connection. This User Manual will show you how to set up the AAM6030BI CPE, and how to customize its configuration to get the most out of this product. Equipped with a 4 Port 10/100 Ethernet Connects multiple PCs to the Internet with just one WAN IP Address (when configured in router mode with NAT enabled) Configurable through user-friendly web pages Supports Single-Session IPSec and PPTP Pass-Through for Virtual Private Network (VPN) Several popular games are already pre configured. [. . . ] Figure 11 shows a default CPE address of 192. 1 because this was the default CPE defined when the CLIP connection was configured. The hostname can be any alphanumeric word that does not contain spaces. The domain name is used to in conjunction with the host name to uniquely identify the CPE. Figure 11 (Management IP address) The apply button will temporarily save this connection. To make the change permanent you need to click on Tools (at the top of the page) and select System Commands. You can enable or disable Firewall and NAT by going to the Home screen, click setup and under LAN Setup, select Firewall/NAT Services. To make the change permanent you need to click on Tools (at the top of the page) and select System Commands. For basic router functionality, the user does not need to utilize these advanced features. The features help with routing, security, port configuration, and plug and play capability. UPnP NAT and Firewall Traversal allow traffic to pass-thru the router for applications using the UPnP protocol. this feature requires one active DSL connection. In presence of multiple DSL connections, select the one over which the incoming traffic will be present, for example the default Internet connection. To enable UPnP, you must first have a WAN connection configured. Once a WAN connection is configured, from the Home screen, click Advanced and under Advanced, select UPnP. this will bring up the screen shown in Figure 12. You must enable UPnP and then select which connection will utilize UPnP. To make the change permanent you need to click on Tools (at the top of the page) and select System Commands. Using the Port Forwarding page, you can provide local services (for example web hosting) for people on the Internet or play Internet games. When users send this type of request to your network via the Internet, the Router will forward those requests to the appropriate PC. Port forwarding can be used with DHCP assigned addresses but remember that a DHCP address is dynamic (not static). For example, if you were configuring a Netmeeting server, you would want to assign this server a static IP address so that the IP address is not reassigned. [. . . ] It keeps track of all these connections and makes sure that the correct information gets to the correct local machine. Occasionally, there are certain programs that don't work well through NAT. Some games, and some specialty applications have a bit of trouble. The router contains special functionality to handle the vast majority of these troublesome programs and games. [. . . ]