User manual ASUS AGP-V264GT3 SPEED SETUP POSTER

[. . . ] Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners' benefit, without intent to infringe. · NVIDIA, GeForce 256, and combinations thereof are trademarks of NVIDIA Corporation. · Windows, MS-DOS, and DirectX are registered trademarks of Microsoft Corporation. · Adobe and Acrobat are registered trademarks of Adobe Systems Incorporated. [. . . ] S/W Reference ASUS Live 36 Use the Up or Down Buttons on the ASUS Main Panel or the UP and DOWN arrow keys on your keyboard to select Video Connector and then the Left and Right Buttons or the LEFT and RIGHT arrow keys to set your video connection (Composite, SVideo, or Tuner) or video standard (NTSC-M, NTSC-N, NTSC-4. 43, PAL-BGHI, PALM, PAL-N, PAL-4. 43 or SECAM). NOTE: Users with the PAL D/K models should select PAL-BGHI for the Video Standard. ASUS V6600/V6800 Series User's Manual 4. Software Reference If desired, you may adjust the Brightness, Contrast, Saturation, and Hue of your display by using the video source setup screen. Use the Up or Down Buttons on the ASUS Main Panel or the UP and DOWN arrow keys on your keyboard to select the desired option and then the Left and Right Buttons or the LEFT and RIGHT arrow keys to make the desired adjustments. Click again the Show/Hide Video Source Options button on the ASUS Main Panel to exit from the video source option screen. Video Capture IMPORTANT: It is the intent of ASUS that this product be used in full compliance with the copyright laws of your respective and other countries and that prior permission be obtained from copyright owners whenever necessary. IMPORTANT: You must enable the DMA transfer mode of your hard disk (EIDE HD) to get the maximum data transfer capability (704 x 480, 30 frames/second) during the video capture process. Otherwise, your system may become unstable. Enabling DMA Transfer Mode NOTE: The How to Get Maximum Capture Performance dialog box will tell you how to enable your hard disk's DMA transfer mode to get the best capture performance. Simply follow the on-screen instructions to enable DMA mode. Click Start, point to Settings, and then click Control Panel. The System Properties dialog box appears. Click the Device Manager tab and then click the plus sign next to Disk drives, and then double-click your hard disk. The hard disk's Properties box appears. The screen will freeze momentarily and the captured image (saved as a BMP file, using consecutive numbers) will be listed in the Captured File(s) List dialog box. You may click View to view a selected captured image. 4. Repeat Step 1 as necessary. Capture Frames (F6) Capture Frames lets you capture video stream data as consecutive images and then show these images on your desktop through your default movie player. To begin capturing, do the following: 1. Click the Capture Frames (F6) button on the ASUS Main Panel or press the F6 key to open the Capture Frames box. Click Capture to begin capturing the desired frame or frames on ASUS Live's display screen and then click Done when finished. The initial frame of the captured video (saved as an AVI file) will immediately be displayed on your movie player. Click the PLAY button of your player to view the captured video. Video Recording (F7) Video Recording lets you capture video stream data continuously and then show these images on your desktop through your default movie player. To begin capturing, do the following: 1. Click the Video Recording (F7) button on the ASUS Main Panel or press the F7 key. [. . . ] Consult your monitor documentation for the rate. DirectX or the other appli- · Windows 95 is not OSR2. 1 or later. cations report no AGP · DirectX version is not 6. 0 or later. · You have not installed appropriate drivers for the AGP chipset. [. . . ]