User manual ASUS AP1400R

[. . . ] ® AP1400R Dual Pentium® III 1U Rackmount Server User's Manual Disclaimer/Copyrights No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. ASUS PROVIDES THIS MANUAL "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. [. . . ] HDD Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Power Supply Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Output Voltage Regulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Output Current Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Over-Voltage Protection (OVP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 40 40 41 43 43 43 43 System Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 8 Introduction You are reading the AP1400R Server User's Manual. This manual provides genaral and specific information about the AP1400R server. "About This Manual" contains an introduction on the contents of this document that include target audience, chapter description, and conventions used. It also lists the items included in the system package. AP1400R Server User's Manual About This Manual 9 Audience This manual is intended for experienced users and integrators with hardware knowledge of personal computers. Checklist Contents Description This manual contains the following parts: 1. Introduction: About This Manual This part contains an introduction on the contents of this document that include target audience, chapter description, and conventions used. It also lists the items included in the system package. Chapter 1: System Overview This chapter describes the external features of the AP1400R server. It includes specific sections that identify these features. Chapter 2: Basic Operation This chapter tells how to get started with the AP1400R server. The basic operation includes connecting the cables and powering on the system. Chapter 3: Hardware Setup This chapter describes the hardware setup procedures that you have to perform when installing system components. It also gives detailed information on the internal components and how to install them. 10 Introduction: About This Manual Conventions Symbols To make sure that you perform certain tasks properly, take note of the following symbols used throughout this guide. WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORTANT: Information that you MUST follow to complete a task. NOTE: Tips and information to aid in completing a task. [. . . ] The LED connector on the backplane connects to the front panel LEDs to indicate HDD access, HDD failure, thermal failure, and fan failure. Front Side The front side of the backplane has three 80-pin SCA SCSI Out connectors available for the SCA SCSI hard disks. The hard disks are extenally accessible from the front panel. SCSI Out HDD0 SCSI Out HDD1 SCSI Out HDD2 Back Side The back side of the backplane include the power, SMB, LED, and SCSI In connectors. Backplane Power Connector SCSI In Connector LED Connector SMB Connector NOTE The SCSI backplane is already installed in the system chassis. You do not need to remove the backplane when installing components or connecting cables. AP1400R Server User's Manual 33 Connecting Cables Checklist SCSI Cable Connect the 68-pin SCSI cable to the SCSI connector on the motherboard and the other end to the SCSI In connector on the backplane board. SCSI Connector on the Motherboard SCSI Connector on the Backplane IDE Cable Connect one end of the IDE cable to connector labeled IDE1 on the motherboard. Connect the other end of the cable to the IDE connector on the CD-ROM adapter board. IDE1 Connector on the Motherboard IDE Connector on the CD-ROM Adapter Board 34 Chapter 3: Hardware Setup Connecting Cables Floppy Cable Connect the floppy cable directly to the floppy drive connector. Features Floppy Drive Connector LED Connector on the Motherboard LED Connector on the Backplane LED Cable Connect one end of the LED cable to the PANEL2 connector on the motherboard and the other end to the LED connector on the backplane board. [. . . ]