User manual ASUS CM5671

[. . . ] SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners' benefit, without intent to infringe. ii Contents Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Setting to [Auto] enables the LBA mode if the device supports this mode, and if the device was not previously formatted with LBA mode disabled. Configuration options: [Disabled] [Auto] ASUS CM5671 Series 4-11 Block (Multi-Sector Transfer) [Auto] Enables or disables data multi-sectors transfers. When set to [Auto], the data transfer from and to the device occurs multiple sectors at a time if the device supports multi-sector transfer feature. When set to [Disabled], the data transfer from and to the device occurs one sector at a time. Configuration options: [Disabled] [Auto] PIO Mode [Auto] Allows you to select the data transfer mode. Configuration options: [Auto] [0] [1] [2] [3] [4] DMA Mode [Auto] Sets the DMA mode. Configuration options: [Auto] [SWDMA0] [SWDMA1] [SWDMA2] [MWDMA0] [MWDMA1] [MWDMA2] [UDMA0] [UDMA1] [UDMA2] [UDMA3] [UDMA4] [UDMA5] S. M. A. R. T. [Auto] Sets the Smart Monitoring, Analysis, and Reporting Technology. Configuration options: [Auto] [Disabled] [Enabled] 32Bit Data Transfer [Enabled] Enables or disables 32-bit data transfer. Configuration options: [Disabled] [Enabled] 4. 3. 6 System Information This menu gives you an overview of the general system specifications. The BIOS automatically detects the items in this menu. Main System Information Model Name Model ID ASUS-BIOS Version Date 1000. 006 11/06/2007 ASUS CM5671/SAS 8064A0 BIOS SETUP UTILITY Processor Information System Memory Information Enter F1 F10 ESC Select Screen Select Item Go to Sub Screen General Help Save and Exit Exit v02. 61 (C)Copyright 1985-2006, American Megatrends, Inc. 4-12 Chapter 4: BIOS setup Processor Displays the installed processor information. Main Processor Information *** CPU1 : Brand N/A Speed N/A Ratio N/A Cache N/A ID/uCode N/A *** CPU2 : Brand Intel(R) Xeon(TM) CPU 3. 20GHz Speed 3. 20 GHz Ratio Actual 12 Max 12 Cache L1/32KB L2/4096KB ID/uCode 0F64h/None BIOS SETUP UTILITY F1 F10 ESC Select Screen Select Item General Help Save and Exit Exit v02. 61 (C)Copyright 1985-2006, American Megatrends, Inc. System Memory Displays the installed system memory information. Main System Memory Information Type : DDR2 533 Total Memory: 1024MB DIMM_00 - 1024 AMB Temperature - 96°C DIMM_01 - N/A DIMM_02 - N/A DIMM_03 - N/A DIMM_10 - N/A DIMM_11 - N/A DIMM_12 - N/A DIMM_13 - N/A DIMM_20 - N/A Select Screen DIMM_21 - N/A Select Item DIMM_22 - N/A F1 General Help DIMM_23 - N/A F10 Save and Exit DIMM_30 - N/A ESC Exit DIMM_31 - N/A DIMM_32 - N/A DIMM_33 - N/A v02. 61 (C)Copyright 1985-2006, American Megatrends, Inc. PCIe Link Speed PCIE1 Slot Payload Size PCIE3 Slot Payload Size [Branch Interleave] [Enabled] [Disabled] [Disabled] [Enabled] [Disabled] [4:1] [Enabled] [Disabled] [4:1] [Disabled] [Enabled] [Auto] [Auto] [Auto] v02. 61 (C)Copyright 1985-2006, American Megatrends, Inc. MCH Branch Mode [Branch Interleave] Allows you to select the MCH branch mode. Configuration options: [Branch Sequencing] [Branch Interleave] [Branch Mirroring] [Single Channel 0] Patrol Scrubbing [Enabled] Enables or disables the Patrol Scrubbing. Configuration options: [Disabled] [Enabled] 4-16 Chapter 4: BIOS setup Demand Scrubbing [Disabled] Enables or disables the Demand Scrubbing. Configuration options: [Disabled] [Enabled] Branch Dependent Sparing [Disabled] Allows you to enable or disabled the branch-dependent DIMM sparing feature. Configuration options: [Disabled] [Enabled] Branch 0 [Enabled] Allows you to enable or disable the Branch 0. If you set this item to [Disabled], the following three items will be grayed out. Configuration options: [Disabled] [Enabled] Branch Specific Sparing [Disabled] Allows you to enable or disable the DIMM sparing feature. Configuration options: [Disabled] [Enabled] Rank Interleaving [4:1] Allows you to select the Branch 0 Rank Interleave. Configuration options: [1:1] [2:1] [4:1] Branch 1 [Enabled] Allows you to enable or disable the Branch 1. If you set this item to [Disabled], Branch 0 and the following two items will be grayed out. Configuration options: [Disabled] [Enabled] Branch Specific Sparing [Disabled] Allows you to enable or disable the DIMM sparing feature. [. . . ] Double-click the AUTORUN. EXE and follow step 4 to run the installation. 6-16 Chapter 6: Driver installation 4. Click the Install Drivers option to begin installation. 5. Click Next button when the Intel® PRO Network Connections ­ InstallShield Wizard window appears. ASUS CM5671 Series 6-17 6. Select I accept the terms in the license agreement and then click the Next button. 7. Press the Complete and click Next button to fully install the driver, Intel® PROSet for Windows Device Manager and Advanced Networking Services. 6-18 Chapter 6: Driver installation 8. Follow the screen instructions to complete installation. 9. When finished, press Finish to continue. ASUS CM5671 Series 6-19 To verify the LAN controller driver installation: 1. Right-click the My Computer icon on the Windows® desktop , then select Properties from the menu. Click the Hardware tab, then click the Device Manager button. Click the "+" sign before the item Network adapters, then Intel(R) PRO/1000 EB Network Connection with I/O Acceleration item should appear. 6-20 Chapter 6: Driver installation 6. 3. 2 Red Hat Follow these instructions when installing the Intel® LAN controller base driver for the in Red Hat® operating system. Before installing the LAN driver: Before installing the LAN driver, you must install the kernel development application. [. . . ]