User manual ASUS ET2311IUTH-B005K

[. . . ] User Manual ET2311 Series English E8286 April 2013 English COPYRIGHT INFORMATION No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe. [. . . ] • Aspect Control: Select the aspect ratio to “Full” or “OverScan”. This setting is available only when you use the All-in-One PC as a standard desktop LCD monitor. • Auto Adjust: Adjusts the horizontal position (H-Position) and the vertical position (VPosition) of the display. This feature is available only when you use the All-in-One PC as a standard desktop LCD monitor. Input Select • PC: Displays video produced by the All-in-One PC. • HDMI: Display video input from the HDMI Input port. All-in-One PC ET2311 Series H-Position - Adjusts the horizontal position of the OSD menu. V-Position - Adjusts the vertical position of the OSD menu. OSD Timeout - Sets the display duration of OSD menu from 10 to 120 seconds. DDC/CI - Enables or disables the DDC/CI (Display Data Channel/Command Interface). • Information: Displays resolution and refresh rate. • All Reset: Resets all OSD settings to defaults. Exit Exit from the OSD menu. 1. 2. 3. 4. All-in-One PC ET2311 Series 23 English System Setup • OSD Setup: Gestures English 24 The gestures allow you to launch programs and access the settings of your All-in-One PC. The functions can be activated by using the hand gestures to your All-in-One PC’s display panel. Using gestures Left edge swipe Right edge swipe Swipe from the left edge of the screen to shuffle your running apps. Top edge swipe Swipe from the right edge of the screen to launch the Charm bar. Finger slide • • In the Start screen, swipe from the top edge of the screen to view the All Apps bar. In a running app, swipe the from top edge of the screen to view its menu. Slide your finger to scroll up and down and slide your finger to pan the screen left or right. All-in-One PC ET2311 Series Zoom out Zoom in Bring together your two fingers on the touch panel. Spread apart your two fingers on the touch panel. Tap and hold Tap/Double tap • • To move an app, tap and hold the app tile and drag it to a new location. To close an app, tap and hold the top side of the running app and drag it down to the bottom of the screen to close it. • • Tap an app to launch it. On Desktop mode, double-tap an item to launch it. All-in-One PC ET2311 Series 25 English Configuring the audio output using an HDMI device English 26 If you want to use a high-definition TV as an audio output device, connect the TV to the All-inOne PC using HDMI and follow the steps below to configure the audio settings. To configure the audio output using an HDMI device: 1. From the Start screen, click Desktop to launch the Desktop Mode. NOTE: For more details, refer to the section Start screen under Working with Windows® 8. 2. Right-click the Volume Mixer icon on the Windows® taskbar and click Playback devices. 3. From the Playback screen, select Digital Audio (HDMI). 4. Click Configure and the Speaker Setup window pops up. All-in-One PC ET2311 Series 5. Select Stereo and click Next. 6. Tick the Front left and right option, and click Next. 7. Click Finish to exit the speaker setup. All-in-One PC ET2311 Series 27 English English 28 All-in-One PC ET2311 Series Chapter 3: Working with Windows® 8 System requirements Processor RAM Hard disk space Graphics card Screen resolution 1GHz or faster 1GB (32-bit) or 2 GB (64-bit) 16 GB (32-bit) or 20 GB (64-bit) Microsoft DirectX9 graphics device with WDDM driver 1024 x 768 for Windows® apps 1366 x 768 for Snap feature English 29 NOTE: For updates on these system requirements, visit: http://www. windows. microsoft. com/en-us/windows-8/faq All-in-One PC ET2311 Series Starting for the first time (For Windows® 8 and Windows® 8 Professional) When you start your computer for the first time, a series of screens appear to guide you in configuring the basic settings of your Windows® 8 operating system. [. . . ] Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. English 63 Canada, avis d’Industry Canada (IC) Cet appareil numérique de classe B est conforme aux normes canadiennes ICES-003 et RSS210. Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne doit pas causer d’interférence et (2) cet appareil doit accepter toute interférence, notamment les interférences qui peuvent a ecter son fonctionnement. Declaration of Conformity (R&TTE directive 1999/5/EC) The following items were completed and are considered relevant and sufficient: • • • • • • • Essential requirements as in [Article 3] Protection requirements for health and safety as in [Article 3. 1a] Testing for electric safety according to [EN 60950] Protection requirements for electromagnetic compatibility in [Article 3. 1b] Testing for electromagnetic compatibility in [EN 301 489-1] & [EN 301 489-17] Effective use of the radio spectrum as in [Article 3. 2] Radio test suites according to [EN 300 328-2] CE Mark Warning This is a Class B product, in a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. CE marking for devices without wireless LAN/Bluetooth The shipped version of this device complies with the requirements of the EEC directives 2004/108/EC “Electromagnetic compatibility” and 2006/95/EC “Low voltage directive”. / All-in-One PC ET2311 Series CE marking for devices with wireless LAN/ Bluetooth English 64 This equipment complies with the requirements of Directive 1999/5/EC of the European Parliament and Commission from 9 March, 1999 governing Radio and Telecommunications Equipment and mutual recognition of conformity. is for class II device. Wireless Operation Channel for Different Domains N. [. . . ]