User manual ASUS GIGAX 1116

[. . . ] No Ethernet link SPEED Green Amber Green Amber DUPLEX ASUS GigaX 1116 LED SYSTEM Color Green Amber Status Description On On Off The switch is on. The switch is initializing or VCT is in progress. Port numbers On The port is selected to execute VCT. [. . . ] The switch goes into VCT mode and the system LED turns amber. All port LEDs are off, except the PORT SELECT (STATUS) LED. 1 STATUS SPEED DUPLEX 3 5 7 9 11 13 15 PORT SELECT Pair 1 Pair 2 PORT SELECT Pair 3 Pair 4 2 10 4 20 6 30 8 40 10 50 12 60 14 70 16 >80 Meters SYSTEM STATUS SPEED DUPLEX 2. Press the SEL button to select the port you wish to test. The PORT SELECT (STATUS) LED of the selected port lights up. NOTE. If no other action is taken after the VCT or SEL button is pressed, the switch automatically goes back to normal operation after 15 seconds. 3. Press the VCT button again to execute VCT on the selected port. The PORT SELECT (STATUS) LED of the selected port blinks in green to indicate that VCT is in progress. The test is complete when the PORT SELECT (STATUS) LED stops blinking. Refer to page 9 for examples of VCT test results. Press SEL to select another port to test. When done, press the VCT button to return to normal switch operation. NOTE. The switch automatically goes back to normal operation after two minutes even if you do not press the VCT button. ASUS GigaX 1116 The cable is not connected to any device LED PORT SELECT Pair 1 Pair 2 Pair 3 Pair 4 COLOR Green Amber Amber Amber Amber DESCRIPTION The cable is OK. The four pairs in this cable are open (not connected) up to at least 80 meters. 1 STATUS SPEED DUPLEX STATUS SPEED DUPLEX A A A A A A A A A A A A A A A A A A A A 3 5 G A A 7 A A 9 A A 11 A A 13 A A 15 PORT SELECT A A Pair 1 Pair 2 PORT SELECT Pair 3 Pair 4 Meters 2 10 4 20 6 30 8 40 10 50 12 60 14 70 16 >80 G - Green A - Amber The cable is connected to a Fast Ethernet (10/100 Mbps) device LED PORT SELECT Pair 1 Pair 2 Pair 3 Pair 4 COLOR Green Off Off Green or Amber Green or Amber DESCRIPTION Pairs 1 and 2 are connected to a device. 1 STATUS SPEED DUPLEX STATUS SPEED DUPLEX G A G A G A G A G A G A G A G A 3 5 G 7 9 11 13 15 PORT SELECT Pair 1 Pair 2 PORT SELECT Pair 3 Pair 4 Meters 2 10 4 20 6 30 8 40 10 50 12 60 14 70 16 >80 G - Green A - Amber NOTE. Fast Ethernet (10/100 Mbps) uses only two pairs (Pairs 1 and 2) of cables to transmit/receive data. Disregard Pairs 3 and 4 LEDs. The cable is connected to a Gigabit (1000 Mbps) device LED PORT SELECT Pair 1 Pair 2 Pair 3 Pair 4 COLOR Green Off Off Off Off DESCRIPTION Four pairs are connected to a device. 1 STATUS SPEED DUPLEX STATUS SPEED DUPLEX 3 5 G 7 9 11 13 15 PORT SELECT Pair 1 Pair 2 PORT SELECT Pair 3 Pair 4 2 10 4 20 6 30 8 40 10 50 12 60 14 70 16 >80 Meters G - Green A - Amber ASUS GigaX 1116 9 English VCT test results Placement options Placing the switch on a flat surface Place the switch on a flat surface that can support the weight of the switch and its accessories. Make sure the surface meets the operating environment specifications (page 3). NOTE. [. . . ] The most commonly installed computer network technology, usually using twisted-pair wiring. Ethernet data rates are 10 Mbps, 100 Mbps, and 1000 Mbps. Media Dependent Interface An Ethernet port connection that allows hubs and switches to connect to other hubs and switches using a standard straight-through cable. [. . . ]