User manual ASUS L1N64-SLI WS

[. . . ] L1N64-SLI WS Motherboard E3014 Second Edition V2 December 2006 Copyright © 2006 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. ASUS PROVIDES THIS MANUAL "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. [. . . ] Connect the serial port module cable to this connector, then install the module to a slot opening at the back of the system chassis. L1N64-SLI WS COM1 PIN 1 L1N64-SLI WS COM port connector 2-0 Right Audio Channel Ground Ground Left Audio Channel CD (black) Chapter 2: Hardware information 12. TPM connector (20-1 pin TPM) [Optional] This connector supports a Trusted Platform Module (TPM) system, which can securely store keys, digital certificates, passwords, and data. A TPM system also helps enhance network security, protects digital identities, and ensures platform integrity. X GND SERIRQ L1N64-SLI WS TPM L1N64-SLI WS TPM connector X GND X +3. 3V LAD0 +3. 3V LAD3 LRESETn LFRAMEn CK_33M_TPM GND LAD1 LAD2 X X X PIN 1 The TPM module is purchased separately. ASUS L1N64-SLI WS 2- 13. System panel connector (20-8 pin PANEL) This connector supports several chassis-mounted functions. PLED PLED+ PLED- SPEAKER +5V Ground Ground Speaker PANEL IDE_LED+ IDE_LEDL1N64-SLI WS IDE_LED RESET PWRSW L1N64-SLI WS System panel connector * Requires an ATX power supply. · System power LED (2-pin PLED) This 3-pin connector is for the system power LED. Connect the chassis power LED cable to this connector. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode. Hard disk drive activity LED (2-pin IDE_LED) This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable to this connector. The IDE LED lights up or flashes when data is read from or written to the HDD. System warning speaker (4-pin SPEAKER) This 4-pin connector is for the chassis-mounted system warning speaker. The speaker allows you to hear system beeps and warnings. ATX power button/soft-off button (2-pin PWRSW) This connector is for the system power button. Pressing the power button turns the system on or puts the system in sleep or soft-off mode depending on the BIOS settings. Pressing the power switch for more than four seconds while the system is ON turns the system OFF. Reset button (2-pin RESET) This 2-pin connector is for the chassis-mounted reset button for system reboot without turning off the system power. · · · · 2-2 Chapter 2: Hardware information Reset Ground PWR Ground This chapter describes the power up sequence and ways of shutting down the system. Powering up 3 Chapter summary 3. 1 3. 2 Starting up for the first time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 Powering off the computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2 3 ASUS L1N64-SLI WS 3. 1 1. 5. Starting up for the first time After making all the connections, replace the system case cover. Connect the power cord to the power connector at the back of the system chassis. Connect the power cord to a power outlet that is equipped with a surge protector. Turn on the devices in the following order: a. Monitor Be sure that all switches are off. External SCSI devices (starting with the last device on the chain) System power 6. After applying power, the system power LED on the system front panel case lights up. [. . . ] Select Ok to discard any changes and load the previously saved values. ASUS LN-SLI WS - Load Setup Defaults Allows you to load the default values for each of the parameters on the Setup menus. When you select this option or if you press <F5>, a confirmation window appears. Select Exit & Save Changes or make other changes before saving the values to the non-volatile RAM. -0 Chapter : BIOS setup This chapter describes the contents of the support CD that comes with the motherboard package. Software support 5 Chapter summary 5. 1 5. 2 Installing an operating system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1 Support CD information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]