User manual ASUS M2N-VM SE

[. . . ] IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners' benefit, without intent to infringe. ii Contents Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Doing so can cause system boot failure! 4. Restart the system after the utility completes the updating process. The recovered BIOS may not be the latest BIOS version for this motherboard. Visit the ASUS website (www. asus. com) to download the latest BIOS file. 4-6 Chapter 4: BIOS setup 4. 1. 5 ASUS EZ Flash utility The ASUS EZ Flash feature allows you to update the BIOS without having to go through the long process of booting from a floppy disk and using a DOS-based utility. The EZ Flash utility is built-in the BIOS chip so it is accessible by pressing <Alt> + <F2> during the Power-On Self Tests (POST). Visit the ASUS website (www. asus. com) to download the latest BIOS file for the motherboard. Save the BIOS file to a floppy disk, then restart the system. Press <Alt> + <F2> during POST to display the following. Insert Disk then press Enter or ESC to continue POST 4. Insert the floppy disk that contains the BIOS file to the floppy disk drive then press <Enter>. The following screen appears. AwardBIOS Flash Utility for ASUS V1. 01 (C) Phoenix Technologies Ltd. All Rights Reserved For NF-KC804-A8N-SLI-00 DATE: 11/18/2004 Flash Type - SST 49LF004A/B /3. 3V File Name to Program: Message: Please wait. . . 5. When the correct BIOS file is found, EZ Flash performs the BIOS update process and automatically reboots the system when done. Do not shutdown or reset the system while updating the BIOS to prevent system boot failure! ASUS M2N-VM SE 4-7 4. 1. 6 ASUS Update utility The ASUS Update is a utility that allows you to manage, save, and update the motherboard BIOS in Windows® environment. The ASUS Update utility allows you to: · · · · · Save the current BIOS file Download the latest BIOS file from the Internet Update the BIOS from an updated BIOS file Update the BIOS directly from the Internet, and View the BIOS version information. This utility is available in the support CD that comes with the motherboard package. ASUS Update requires an Internet connection either through a network or an Internet Service Provider (ISP). Installing ASUS Update To install ASUS Update: 1. Place the support CD in the optical drive. Click the Utilities tab, then click Install ASUS Update VX. XX. XX. The Setup program is designed to make it as easy to use as possible. Being a menu-driven program, it lets you scroll through the various sub-menus and make your selections from the available options using the navigation keys. · The default BIOS settings for this motherboard apply for most conditions to ensure optimum performance. If the system becomes unstable after changing any BIOS settings, load the default settings to ensure system compatibility and stability. Select the Load Default Settings item under the Exit Menu. See section "4. 7 Exit Menu. " The BIOS setup screens shown in this section are for reference purposes only, and may not exactly match what you see on your screen. Visit the ASUS website (www. asus. com) to download the latest BIOS file for this motherboard. · · ASUS M2N-VM SE 4-11 4. 2. 1 BIOS menu screen Menu bar Configuration fields General help Menu items Main Advanced Power Phoenix-Award BIOS CMOS Setup Utility Boot Exit 15 : 30 : 36 Wed, Nov 5 2004 [1. 44M, 3. 5 in. ] [ST321122A] [ASUS CDS520/A] [None] [None] [None] [None] [None] [None] [Disabled] 256MB 256MB -/+: Change Value Enter: Select Sub-menu F5: Setup Defaults F10: Save and Exit Select Menu Item Specific Help Change the internal time. System Time System Date Legacy Diskette A: Primary IDE Master Primary IDE Slave Secondary IDE Master Secondary IDE Slave First SATA Master Second SATA Slave Third SATA Master Fourth SATA Slave HDD SMART Monitoring Installed Memory Usable Memory F1:Help ESC: Exit : Select Item : Select Menu Sub-menu items Legend bar 4. 2. 2 Main Advanced Power Boot Exit Menu bar For changing the basic system configuration For changing the advanced system settings For changing the advanced power management (APM) configuration For changing the system boot configuration For selecting the exit options and loading default settings The menu bar on top of the screen has the following main items: To select an item on the menu bar, press the right or left arrow key on the keyboard until the desired item is highlighted. · The BIOS setup screens shown in this chapter are for reference purposes only, and may not exactly match what you see on your screen. Visit the ASUS website (www. asus. com) to download the latest BIOS information. · 4-12 Chapter 4: BIOS setup 4. 2. 3 Legend bar At the bottom of the Setup screen is a legend bar. The keys in the legend bar allow you to navigate through the various setup menus. The following table lists the keys found in the legend bar with their corresponding functions. Navigation Key <F1> <F5> <Esc> Left or Right arrow Up or Down arrow Function Displays the General Help screen Loads setup default values Exits the BIOS setup or returns to the main menu from a sub-menu Selects the menu item to the left or right Moves the highlight up or down between fields highlighted field Page Down or ­ (minus) Scrolls backward through the values for the Page Up or + (plus) <Enter> <F10> Scrolls forward through the values for the highlighted field Brings up a selection menu for the highlighted field Saves changes and exit 4. 2. 4 Menu items The highlighted item on the menu bar displays the specific items for that menu. For example, selecting Main shows the Main menu items. [. . . ] 3. Using the SLI mode To use SLI mode: Set the SLI Multi-GPU feature in Display Properties. See section "6. 2. 4 Enabling the multi-GPU feature in Windows" on page 6-7 for details. When prompted, click Yes to restart your system. · When the SLI mode is disabled, the multi-monitor feature is automatically enabled. Use the NVIDIA nView utility to configure your multi-monitor setup. [. . . ]