User manual ASUS MAXIMUS VI EXTREME C2

[. . . ] IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe. [. . . ] Configuration options: [Auto] [Preset1] [Preset2] [Preset3] PLX +0. 9V Core Voltage [Auto] This is the Core Voltage for PLX Gen 3. o Bridge Chip. Voltage is disabled if no cards are present on it’s allocated slots. Configuration options: [Auto] [0. 600] - [1. 110] PLX +1. 8V AUX Voltage [Auto] AUX Voltage for PLX Gen 3. o Bridge Chip. Voltage is disabled if no cards are present on it’s allocated slots. Configuration options: [Auto] [1. 200] - [2. 500] PCIE Clock Amplitude [Auto] Adjust the magnitude of the PCIE Clocks. Configuration options: [Auto] [+5] - [-4] Internal Graphics [Auto] Keep IGD enabled based on setup options. Configuration options: [Auto] [Disabled] [Enabled] ASUS MAXIMUS VI EXTREME 3-19 Chapter 3 CPU Power Management The subitems in this menu allow you to set the CPU ratio and features. Enhanced Intel SpeedStep Technology [Enabled] Allows the operating system to dynamically adjust the processor voltage and cores frequency to decrease the average power consumption and decrease average heat production. Configuration options: [Enabled] [Disabled] Turbo Mode [Enabled] Allows you to enable your processor cores to run faster than the base operating frequency when it is below power, current and specification limit. Configuration options: [Disabled] [Enabled] The following items appear only when you set the Turbo Mode to [Enabled]. Turbo Mode Parameters Long Duration Package Power Limit [Auto] Allows you to limit the Turbo Ratio’s time duration thay exceeds the TDP (Thermal Design Power) for maximum performance. Use the <+> and <-> keys to adjust the value. A low value provides enough power for overclocking. A high value provides a better power saving condition. The value ranges from: Level 1 0 - 80A Level 2 0 - 50A Level 3 0 - 30A 3. 5 The Main menu screen appears when you enter the Advanced Mode of the BIOS Setup program. The Main menu provides you an overview of the basic system information, and allows you to set the system date, time, language, and security settings. Main menu Security The Security menu items allow you to change the system security settings. Chapter 3 3-22 • If you have forgotten your BIOS password, erase the CMOS Real Time Clock (RTC) RAM to clear the BIOS password. See section 2. 3. 1 Rear I/O Connection for information on how to erase the RTC RAM via the Clear CMOS button. The Administrator or User Password items on top of the screen show the default [Not Installed]. After you set a password, these items show [Installed]. • Chapter 3: BIOS setup Administrator Password If you have set an administrator password, we recommend that you enter the administrator password for accessing the system. Otherwise, you might be able to see or change only selected fields in the BIOS setup program. To set an administrator password: 1. 2. 3. Select the Administrator Password item and press <Enter>. From the Create New Password box, key in a password, then press <Enter>. Confirm the password when prompted. To change an administrator password: 1. 2. 3. 4. Select the Administrator Password item and press <Enter>. [. . . ] Cet appareil est conforme aux normes CNR exemptes de licence d’Industrie Canada. Le fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas provoquer d’interférences et (2) cet appareil doit accepter toute interférence, y compris celles susceptibles de provoquer un fonctionnement non souhaité de l’appareil. Canadian Department of Communications Statement This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. This class B digital apparatus complies with Canadian ICES-003. VCCI: Japan Compliance Statement VCCI Class B Statement KC: Korea Warning Statement Appendices A-2 Appendices REACH Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://csr. asus. com/english/REACH. htm. DO NOT throw the motherboard in municipal waste. This product has been designed to enable proper reuse of parts and recycling. [. . . ]