User manual ASUS MB168B

[. . . ] 1-4 1. 4. 3 AI Light. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4 Adjusting the monitor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 Connecting the USB cable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 Installing driver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] This class B digital apparatus complies with Canadian ICES-003. iii Safety information • Before setting up this USB monitor, carefully read all the documentation that came with the package. • To prevent fire or shock hazard, never expose this USB monitor to rain or moisture. • Never try to open this USB monitor cabinet. • Before using this USB monitor, make sure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately. • Avoid dust, humidity, and temperature extremes. Do not place this USB monitor in any area where it may become wet. Place this USB monitor on a stable surface. • Never push objects or spill liquid of any kind into the slots on this USB monitor cabinet. • If you encounter technical problems with this USB monitor, contact a qualified service technician or your retailer. • This USB monitor is powered by USB port which complies with LPS and SELV circuit according to IEC60950-1:2005. iv Care & cleaning • Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed with a cloth dampened with mild cleaner. • Avoid using a cleaner containing alcohol or acetone. Use a cleaner intended for use with the LCD. Never spray cleaner directly on the screen, as it may drip inside the monitor and cause an electric shock. The following symptoms are normal with the monitor: • You may find slightly uneven brightness on the screen depending on the desktop pattern you use. • When the same image is displayed for hours, an afterimage of the previous screen may remain after switching the image. The screen will recover slowly or you can turn off the Power Switch for hours. • When the screen becomes black or flashes, or cannot work anymore, contact your dealer or service center to fix it. Do not repair the screen by yourself! Conventions used in this guide WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. [. . . ] For upright position, use the far side strip from the top cover. For tilt-back position, use the other one instead. ASUS USB Monitor MB168B/MB168B+ 2-1 2. 2 Connecting the USB cable Connect one end of the USB cable to the monitor’s USB port, the other end to your computer’s USB port USB 2-2 Chapter 2: Setup 2. 3 Installing driver The USB monitor will work only when the included support-CD are installed properly. Before installation, please make sure the USB cable is connected between the USB monitor and the system. Insert the included support-CD into your computer, the auto-run program will start to install the needed software and driver. USB • • Some anti-virus software might prevent auto-run program. [. . . ]