User manual ASUS ML249HR

[. . . ] Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners' benefit, without intent to infringe. · IBM and OS/2 are registered trademarks of International Business Machines. · BansheeTM are trademarks of 3Dfx Interactive Incorporated. · Windows and MS-DOS are registered trademarks of Microsoft Corporation. [. . . ] Failure to do so may cause severe damage to both your motherboard and expansion cards. Keep all components such as the host adapter in its antistatic bag until you are ready to install it. Use a grounded wrist strap before handling computer components. If you do not have one, touch both of your hands to a safely grounded object or to a metal object, such as the power supply case. Hold components by the edges and try not to touch the IC chips, leads, or circuitry. Place components on a grounded antistatic pad or on the bag that came with the component whenever the components are separated from the system. II. 10 Installation Procedures New Systems Unplug all electrical cords on your computer. Remove the corresponding expansion slot cover from the computer chassis. Ground yourself to an antistatic mat or other grounded source . Pick up the board (still in its sleeve) by grasping the edge bracket with one hand and then remove the plastic sleeve. Position the card directly over the AGP slot and insert one end of the board in the slot first. Windows 95/98 Install VGARTD Insert the installation CD disc or double click the CD drive icon in My Computer to bring up the autorun screen or run Setup. exe in the root directory of the CD drive. You will be presented with a list of install options. A message appears that the VGARTD driver is only required for AGP boards. Click Yes to proceed to install the VGARTD driver. The AGP VGARTD Driver Detection dialog box appears displaying the chipset on your motherboard that the program detected. Click OK to install the driver for your chipset. Windows 95/98 Install VGARTD 14 Installation dialogs are slightly different for each chipset. Follow the onscreen instructions to complete the VGARTD installation. The following steps are for Intel chipsets. In you opted to select other drivers, you will be presented with a drop-down list of other drivers. In the driver selection list, click the VGARTD driver for your chipset and then click Install. The VGARTD driver setup program Welcome dialog box appears. [. . . ] Type D:\NT40 or click Browse to select the path of the display driver for Windows NT. Select ASUS AGP-V3200 and then click OK. Windows NT will once again prompt for confirmation. All appropriate files are then copied to the hard disk. [. . . ]