User manual ASUS MS236H

[. . . ] Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners' benefit, without intent to infringe. · NVIDIA, GeForce2 MX, and combinations thereof are trademarks of NVIDIA Corporation. · Windows, MS-DOS, and DirectX are registered trademarks of Microsoft Corporation. · Adobe and Acrobat are registered trademarks of Adobe Systems Incorporated. [. . . ] Use display adapter scaling Adapter automatically scales the appearance of the display on the monitor. (default) Centered output Centers the image on the flat panel and does not adjust the scale. NOTE: This funciton is only available with DVI/2V1D cards. ASUS MS236H Series User's Manual 57 4. Software Reference TV Change Format Opens a window that specifies a particular TV output format. NOTE: This function is only available with T/Deluxe Combo cards. Video output format This field specifies the type of output signal sent to the TV. If the correct connector cable is connected, S-Video out will generally provide a higher quality output than Composite video out. Specify Auto-select to make the system determine the output signal. Change TV Format Window Selects the TV/video output format based on local country standards. NOTE: If your country is not in the list, find out which type of TV/video output format is most commonly used locally and select it; ie. : PAL-D or NTSC-M. 4. S/W Reference Device Settings 58 Device Adjustments Screen Positioning Selects the TV/video output format based on the four quadrants indicated by the arrows. Click on the arrows to reposition output on the TV monitor. Alternatively, disable the Extended Desktop by right clicking and deselecting the check box, Enabled. Remember: disabling Extended Desktop Mode is necessary before it is possible to enable other display modes, like Clone Mode. ASUS MS236H Series User's Manual 4. Software Reference Clone Mode This mode duplicates the display area of the primary desktop monitor to the secondary display monitor. To enable Clone Mode, enter the TwinView dialog from the Display Properties and Settings tab: click on the Advanced button and the TwinView Tab. Both display monitors now display the same image. Return to the TwinView menu to adjust the output settings of each display: click on either Monitor 1 or Monitor 2 and then enter the appropriate sub-menu: To disable Clone Mode, select Standard (TwinView disabled) and click OK. Display: Lists all currently available TwinView displays. Disable auto-panning on clone device (viewport lock) fixes the position of the virtual desktop display. This virtual desktop display is auto-enabled in Clone Mode. The appearance of the virtual desktop depends on the configuration and maximum display resolution of the primary and secondary monitors. If the second monitor cannot support the current resolution, then the desktop exhibits the virtual effect: only one portion of the primary desktop will be visible on the secondary monitor. [. . . ] DirectX or the other appli- · Windows 95 is not OSR2. 1 or later. cations report no AGP · DirectX version is not 6. 0 or later. · You have not installed appropriate drivers for the AGP chipset. BIOS must support at least 64MB for AGP aperture size. [. . . ]