User manual ASUS P5B-E PLUS

[. . . ] IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT. Products and corporate names appearing in this manual are used only for identification or explanation and to the owner's benefit, without intent to infringe. [. . . ] The default . wav file name is "warning. wav". · Voice message - this field contains the location of the wave file you want to send when a warning phone call is made. Make sure that the wave file exists in the folder. 5. Click the Executing the specified program check box to enable this handling procedure. When enabled, specify the program path and filename to execute when a condition is detected. Click Apply to apply settings or click OK to save settings and exit. Click Cancel if you want to exit and discard changes. Click Help to launch the ASUS VideoSecurity on-line help. 18 2. 3. 4 Device To select a scan device or adjust color settings: 1. Click the Device tab from the ASUS VideoSecurity setup dialog box. 2. Click the Devices combo list box to select video capture device. Click the Video Standard combo list box to set a video standard. Move the slider of each respective parameter to adjust the brightness, saturation, contrast or color hue. Click on the combo list box and select from the list. The values vary depending on your monitor resolution settings. Click OK to apply settings or Cancel to abort. On-Screen Display To set On-Screen Display options: 1. Click the On-Screen Display check box to enable or disable OSD feature. If you want to define a new set of hot keys for On-Screen Display, click the Hotkey text box. Press the hot key combination of your choice. For example, to define the hot key combination Ctrl +Alt + D, place the cursor in the box then press the <Ctrl>, <Alt> and <D> keys simultaneously. Click OK to apply the settings or Cancel to abort. · · The Hotkey text box is activated only when the Enable OSD check box is checked. The following are not usable as hotkeys: Esc, Del, Pause or Break, Enter or Return key, Tab, Spacebar, Print Screen, or Backspace key. Press any other key to complete the combination. 3. 4. 2 Encoder This item allows you to launch the video-conferencing CODEC used by ASUS GameFace. The item allows you to set the frame size, frame rate, data rate and quality. [. . . ] · To use the Display Data Channel (DDC) information, make sure that the Use DDC information button is checked. · To change the Maximum Resolution and Maximum Refresh frequency manually, uncheck the Use DDC information button. · To change the Maximum Resolution, click the combo list box and select desired resolution from the list. · To change the Maximum Refresh frequency, click the combo list box and select desired frequency from the list. [. . . ]