User manual ASUS P5CR-VMC

[. . . ] Motherboard P5CR-VM E1835 First Edition V1 January 2005 Copyright © 2005 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. ("ASUS"). Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. ASUS PROVIDES THIS MANUAL "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. [. . . ] TRPWR connector (2-pin TRPWR1) This connector is for an internal temperature sensor/probe. P5CR-VM 1 P5CR-VM TRPWR connector TRPWR1 2-32 Chapter 2: Hardware information SENSER GND 1 3 . Auxiliary panel connector (20-pin AUX_PANEL1) This connector supports several server system functions. AUX_PANEL1 LAN2_LINKACTLEDLAN2_LINKACTLED+ LAN1_LINKACTLED+ LAN1_LINKACTLED+5VSB I2CDATA_P0 GND P5CR-VM +5VSB AUX_BMCLOCLED# GND AUX_BMCLOCBNT# AUX_BMCLOCLED# AUX_LOCLED1 GND CASEOPEN +5VSB I2CCLK_P0 NC P5CR-VM Auxiliary panel connector PIN1 · · · · · · · Chassis Intrusion connector (3-pin CASEOPEN) This lead is for a chassis with an intrusion detection feature. This requires an external detection mechanism such as a chassis intrusion sensor or microswitch. When you remove any chassis component, the sensor triggers and sends a high-level signal to this lead to record a chassis intrusion event. LAN1 link activity LED (2-pin LAN1_LINKACTLED) This 2-pin connector is for the LAN1 Activity LED. Connect the LAN1 Activity LED cable to this connector. This LED blinks during a network activity and is always lit when linked. LAN2 link activity LED (2-pin LAN2_LINKACTLED) This 2-pin connector is for the LAN2 Activity LED. Connect the LAN2 Activity LED cable to this connector. This LED blinks during a network activity and lights up when linked. Locator LED 1 (2-pin LOCATORLED1) This 2-pin connector is for the Locator LED 1. Connect the Locator LED 1 cable to this connector. This LED lights up when the Locator button is pressed and if there is no LAN1 connection (e. g. Locator LED 2 (2-pin LOCATORLED2) This 2-pin connector is for the Locator LED 2. Connect the Locator LED 2 cable to this connector. This LED is synchronized with the LAN2 LED. Locator Button/Switch (2-pin LOCATORBTN) This connector is for the locator button. This button queries the state of the system locator. Front Panel SMBus (6-1 pin) This connector allows you to connect SMBus (System Management Bus) devices. Devices communicate with an SMBus host and/or other SMBus devices using the SMBus interface. 2-33 ASUS P5CR-VM 1 4 . System panel connector (20-pin PANEL1) This connector supports several chassis-mounted functions. PANEL1 P5CR-VM P5CR-VM System panel connector The sytem panel connector is color-coded for easy connection. · · · System power LED (Green 3-pin PLED) This 3-pin connector is for the system power LED. Connect the chassis power LED cable to this connector. [. . . ] L i m i t e d allows changes only to selected fields, such as Date and Time. F u l l A c c e s s allows viewing and changing all the fields in the Setup utility. Change User Password Select this item to set or change the user password. The User Password item on top of the screen shows the default N o t I n s t a l l e d After you set d. a password, this item shows I n s t a l l e d d. [. . . ]